Electronic circuits and components
Fundamentals
Passive Components
Semiconductors Passive Circuits
Active Circuits
Parts Gallery |
Multiple Choice Quiz: Passive Components<^< Assessment: Passive Components | Course Index | Written Questions: Passive Components >^> Question 1:
The values available in the E6 series are: (a) 1.0, 1.5, 2.2, 3.3, 4.7, 6.8
Answer: A Question 2:
The resistance of a light dependent resistor: (a) falls with increasing light level
Answer: A Question 3:
Two capacitors, each of 220 µF, are connected in parallel. The capacitance of the combination will be: (a) 110µF
Answer: C Question 4:
If the resistance of a material falls with increasing temperature it is said to have: (a) negative temperature coefficient
Answer: A Question 5:
The circuit symbol shown is a: (a) fixed resistor
Answer: C Question 6:
Two capacitors, each of 15 µF, are connected in series. The capacitance of the combination will be: (a) 7.5µF
Answer: A Question 7:
The fourth band of a four band resistor is marked in silver. This indicates a tolerance of: (a) 5%
Answer: B Question 8:
The charge, Q, present in a capacitor is given by the relationship: (a) Q = C / V
Answer: B Question 9:
The primary and secondary voltages present in a loss-free transformer are 240 V and 12 V respectively. If the secondary is connected to a 6 Ω resistor, which one of the following gives the primary current? (a) 100 mA
Answer: A Question 10:
A graph of flux linkage, NΦ, plotted against current, I, for an inductor will take the form of: (a) a curve that rises rapidly
Answer: C Question 11:
The third band of a four band resistor is marked in black. This indicates a multiplier of: (a) 1
Answer: A Question 12:
Two inductors, each of 6.8 mH, are connected in parallel. The inductance of the combination will be: (a) 3.4 mH
Answer: A Question 13:
A loss-free transformer has 1200 primary turns and 300 secondary turns. If the primary winding is connected to a 200 V AC supply which one of the following gives the secondary voltage: (a) 50 V
Answer: A Question 14:
A 100 nF capacitor has a tolerance of ±5%. The maximum possible value for this component will be: (a) 95 nF (b) 105 nF (c) 110 nF
Answer: B Question 15:
Which one of the following statements is TRUE? (a) The windings in a transformer are linked by the voltage that is applied to the transformer's core
Answer: C Question 16:
The resistance of a light dependent resistor: (a) falls with increasing light level
Answer: A Question 17:
An inductor of 100 mH has a tolerance of ±20%. The maximum possible value for this component will be: (a) 80 mH
Answer: C Question 18:
Two resistors, each of 15 Ω, are connected in series. The resistance of the combination will be: (a) 7.5Ω
Answer: C Question 19:
A graph of charge, Q, plotted against voltage, V, for a capacitor will take the form of: (a) a curve that rises rapidly
Answer: C Question 20:
The third band of a four band resistor is marked in orange. This indicates a multiplier of: (a) 1,000
Answer: A Question 21:
Two resistors, each of 220 Ω, are connected in parallel. The resistance of the combination will be: (a) 110Ω (b) 220Ω (c) 440Ω
Answer: A Question 22:
What numeric value is indicated by a red band in the resistor colour code? (a) 1
Answer: B Question 23:
A resistor is marked with the following coloured bands: Red, Red, Red, Gold The value of the resistor will be: (a) 222 Ω 5%
Answer: B Question 24:
In a loss-free transformer: (a) the primary and secondary powers will be the same
Answer: A Question 25:
Two inductors, each of 22 mH, are connected in series. The inductance of the combination will be: (a) 11 mH
Answer: C <^< Assessment: Passive Components | Course index | Written Questions: Passive Components >^> |