Search found 4 matches

Return

by Barmaley_GMN
Mon May 08, 2017 9:42 pm
Jump to forum
Jump to topic

Re: Wake Up from CAN_BUS

clear_bit(pir3, WAKIF); // clear interrupt This is right way. Interrupt Enable code intcon.GIE = 1; // Enable global interrupts intcon.PEIE = 1; // Enable peripheral interrupts st_bit(cancon, REQOP0); cr_bit(cancon, REQOP1); cr_bit(cancon, REQOP2); st_bit(pie3, WAKIE); //Enable interrupt CAN Handle...
by Barmaley_GMN
Mon Sep 11, 2017 8:13 pm
Jump to forum
Jump to topic

Re: Internal CAN-BUS

LeighM wrote:With FC6 only the four standard speeds are selectable in the component, the config registers are not exposed for modification

it's sad. It is step to uncomfortable using the FC.
And thanks again, your code works fine!
by Barmaley_GMN
Sat Sep 16, 2017 5:41 pm
Jump to forum
Jump to topic

Re: CAN-BUS RXbuffers

My problem is seems to be solved. Project worked like random generator. I wasn't able to find regularity. I've swapped all MC but it didn't help. I noticed it worked fine when temperature is hot (after soldering). and mistakes appeared with touching PIC. I made field with ground - nothing. After tha...
by Barmaley_GMN
Mon Feb 11, 2019 7:48 pm
Jump to forum
Jump to topic

Re: SPEED CAN-BUS inernal external

Barmaley_GMN wrote:Thanks!
It helps!

Code: Select all

FCR_RETVAL = FC_CAN_SPI_CAN_Status_2(160);
FCV_FREE1 = FCR_RETVAL & 0x04;


How about configure bits?
____
I solve (attachment).

Code: Select all

 <format >
            <byte value='0x1F' />