Search found 193 matches

by tiny
Sun Apr 19, 2020 7:58 pm
Forum: Flowcode V8
Topic: MFRC522 authentication problem
Replies: 5
Views: 327

Re: MFRC522 authentication problem

Hi Martin, the UID is only hardcoded for the test, if it works, depending on the application, up to 10 UID are stored in an EEprom and already compared with the EEprom data during the UID query. This ensures that only registered tags can be used. Then I would like to write an 8-digit UID on the card...
by tiny
Sun Apr 19, 2020 12:43 am
Forum: Flowcode V8
Topic: MFRC522 authentication problem
Replies: 5
Views: 327

Re: MFRC522 authentication problem

Hello Martin, Thanks for the answer! I can only test this routine on a PIC (ECIO40P16), I have no other platform. SPI and I2C runs on software. Reading the UID and card type is no problem, but authentication always results in an error message. Of course, write and read do not work with this. I looke...
by tiny
Sat Apr 18, 2020 9:00 pm
Forum: Flowcode V8
Topic: MFRC522 authentication problem
Replies: 5
Views: 327

Re: MFRC522 authentication problem

No one here in the forum who can help me?

There is always an authentication error:
Error 3 if I use the 6 bytes 0xFF and an error 1 if I use 6x 0xFF and the 4 UID bytes.
Here the file, changes mainly in the display.

Christina

Test_MFRC522_Read_Write.fcfx
(32.13 KiB) Downloaded 11 times
by tiny
Thu Apr 16, 2020 5:57 pm
Forum: Flowcode V8
Topic: MFRC522 authentication problem
Replies: 5
Views: 327

MFRC522 authentication problem

Hello, maybe someone can help me. I am working with Flowcode 8.2.2.15 and am currently experimenting a bit with the file MFRC522_Read_Write.fcfx from the entry: https://www.matrixtsl.com/mmforums/viewtopic.php?f=63&t=19788&p=86494&hilit=MFRC522_Read_Write#p86494 Reading out the UID works...
by tiny
Thu Jan 23, 2020 3:33 pm
Forum: Flowcode V8
Topic: Setting IP of ESP8266
Replies: 3
Views: 428

Re: Setting IP of ESP8266

Glad I could help!

Christina
by tiny
Thu Jan 23, 2020 2:01 am
Forum: Flowcode V8
Topic: Setting IP of ESP8266
Replies: 3
Views: 428

Re: Setting IP of ESP8266

Hello,
I use the Uart interface for the ESP8266 module.
Below are the necessary steps to define a station AP and to specify the IP address, client name, passkey and encryption method, here WPA_PSK.I hope there is something for you.

Christina

ESP8266_as_AP.fcfx
(11.5 KiB) Downloaded 50 times
by tiny
Sat Jan 18, 2020 11:16 am
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Hello DCW, of course I can not rule out that a certain hardware configuration is involved, as well I can only pass this on for Windows 10 PCs. But on my PC this problem appeared without having changed anything on the hardware or the PC drivers and after some Windows updates I can (hopefully) work wi...
by tiny
Fri Jan 17, 2020 9:32 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

I have programmed and tested a lot in the past few days, added / deleted variables for debugging, worked through the programs step by step with setting / deleting breakpoints. All of these steps used to lead to a restart prompt after a few minutes. None of the problems described in the previous post...
by tiny
Thu Jan 09, 2020 10:03 pm
Forum: Flowcode V8
Topic: Flow code Broken with win10 pro v1909
Replies: 3
Views: 407

Re: Flow code Broken with win10 pro v1909

Hello Roy I also have Flowcode 8.2.1.13 running under Windows 10 Pro Build 1909 and more smoothly than under previous build (1903). I do not know the described problem after the update to build 1909, but before you reinstall Flowcode, try the note below https://www.matrixtsl.com/mmforums/viewtopic.p...
by tiny
Thu Jan 09, 2020 12:29 pm
Forum: Flowcode V8
Topic: No internal EEProm with use of bootloader
Replies: 8
Views: 615

Re: No internal EEProm with use of bootloader

Hello Patrik,
according to the data sheet, the MCU has 256 bytes EEProm, so the addressing should go 0x00 to 0x6F and 0x70 to 0xFF.

Regards
Christina
by tiny
Mon Jan 06, 2020 6:01 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Hi Abhi, the workaround does not help against shutdown syndrome, but it does reduce the number of steps that need to be taken if FC8 cannot be started afterwards. Simply double-click the .reg file and you're ready to go. It always worked for me. There has been almost no shutdown since the update to ...
by tiny
Mon Jan 06, 2020 2:07 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Hi Andre,
With pleasure.
Glad I could help.
by tiny
Mon Jan 06, 2020 11:43 am
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Hello Andre, use Regedit to delete the entire registry entry "HKEY_CURRENT_USER \ Software \ MatrixTSL \ FlowcodeV8". Then delete the directory "C: \ ProgramData \ MatrixTSL \ FlowcodeV8". If you start Flowcode now you have to reconfigure it and install all component updates. A w...
by tiny
Sun Sep 29, 2019 5:58 pm
Forum: Bug Reports
Topic: Flowcode closes...
Replies: 10
Views: 1861

Re: Flowcode closes...

A little tip and a workaround when Flowcode closes again. As described above, delete the registry, reconfigure FC8 and then export the FC8 registry path. When this problem reemerges, simply import the reg-file (double-click) and it will run again. At least for me it has worked 3x until now! best reg...
by tiny
Fri Sep 27, 2019 3:11 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Maybe a little help: PC: Fujitsu Celsius H780, current bios, current drivers Windows 10 Pro x64, build 1903, all updates Flowcode v8.2.1.13, all core and component updates I have cleared all system logs, started FC8 with a simple routine. 4 to 5 times variable in the debug window added or deleted, 4...
by tiny
Sat Sep 21, 2019 8:03 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Just happened: during a simulation added a few variables in the simulation debugger.
Run simulation, pause, add variable (has always been a normal process) and immediately the shutdown window has appeared.
No chance to save!

Christina
by tiny
Sat Sep 21, 2019 3:39 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Thank you for continuing to work on this problem. It is sometimes quite annoying. I also did a rollback on my PC, after that some other programs did not work properly anymore, so PC reinstalled, all updates except Build 1903 installed.FC8 (latest version) installed, after a short time no FC8 file ca...
by tiny
Tue Sep 17, 2019 5:45 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Addendum: the error occurs more often when more than one instance of FC8 is open.

And this shutdown again needs a necessary cleanup of the FC8 registry entry!

Christina
by tiny
Tue Sep 17, 2019 1:16 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

Hello Steve,I have the built 1903 installed, but it happened before this upgrade after any update. The problem with registry delete and reconfigure I already know from the time before Built 1903, now just the shutdown prompts have become a bit more common.Christina
by tiny
Tue Sep 17, 2019 12:36 am
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Re: Bad mistake in FC8!

This issue occurs with Single Instance and also with Multi Instances of FC8. My notebook has the Intel integrated graphics and also a Nvidia graphics card. I use the Intel internal graphics because the Nvidia drivers are mainly optimized for 3D applications. In addition, the error occurs in both gra...
by tiny
Fri Sep 13, 2019 9:21 pm
Forum: Bug Reports
Topic: Error in character representation in a string
Replies: 2
Views: 938

Re: Error in character representation in a string

Hello Ben,
I found this mismatch in the simulation, so I'm going to test that routine inside the MCU.

Many thanks
Christina
by tiny
Fri Sep 13, 2019 4:21 pm
Forum: Bug Reports
Topic: Bad mistake in FC8!
Replies: 48
Views: 4778

Bad mistake in FC8!

I'm using FC8 last update on Windows 10, 1903. Since an update of MS and only in FC8, my PC says goodbye with the following error: Pic2.jpg This occurs mainly when I create, change, or just list variables in the Project Explorer, but also in the simulation debugger, when I delete or add variables. W...
by tiny
Fri Sep 13, 2019 3:24 pm
Forum: Bug Reports
Topic: Error in character representation in a string
Replies: 2
Views: 938

Error in character representation in a string

I'm using FC8 last update on Windows 10, 1903. If ASCII characters smaller than 32 or greater 126 are contained in a string, these are represented as hex numbers. For normal programming, certainly no or only a small problem, but I would like to program an encryption tool and because it may very well...
by tiny
Fri Aug 09, 2019 8:27 am
Forum: Feature Requests
Topic: Com-Port Interrupt in the Simulation
Replies: 2
Views: 1282

Re: Com-Port Interrupt in the Simulation

Thanks Medelec, I'm already testing with a workaround. But with an ESP8266, Bluetooth module and a Nextion display, the simulations would be more realistic.
Nevertheless many thanks for the answer and the offer!
Christina
by tiny
Thu Aug 08, 2019 5:02 pm
Forum: Feature Requests
Topic: Com-Port Interrupt in the Simulation
Replies: 2
Views: 1282

Com-Port Interrupt in the Simulation

Hello Matrix Team,
is there a way to implement a com-port interrupt in the simulation?
Would simplify many tests!

Thank's Christina