Matrix user forums

Hi

Can anyone tell me if Flowcode 3 works with windows 7 professional please?

mel

Hi All
is there a way for the delay function to use micro seconds instead of the standard milliseconds?

Hello Everyone. I am a relative beginner with pics and flowcode, and have a problem, that I am not sure that I can solve using flowcode, so forgive me if this is a stupid question. I am using a Pic 16f628A at the moment to generate a 30 minute delay. Is it possible ( using flowcode) to use the same ...

I want to be able to monitor & turn on an LED when my circuit supply line drops from about 9.8Volt (New Battery) to about 7Volts( Low Battery). I would anticipate setting the battery reference voltage in the circuit,with a potentiometer to about 7 Volts & when the battery drops lower than this ,then...

Thanks for the info, much appreciated!...... having done forther tests , I think I am right in saying, that this pin (RA4) with the pull up resistor, can then only sink an output & not source it, is that correct?

I am quite new to flowcode so excuse me if this is a silly question. I have programmed this PIC 18F84A, to turn on each port ( ie: RBO to RB7 & RA0 to RA4 a total of 13 ports) in a sequence of..... on for 1 second & off for one second.. next port etc. I have used the Led blocks to show the outputs v...

I am using a PIC 16F 84A, and wanted to use it as a frequency divider, but am not sure how to do this within flowcode, or as to whether it is possible to do it. For example: - I have a 555 timer chip configured in its astable mode, which generates an output squarewave frequency of 60 kHz (approximat...

Hello Mark Thank you for getting back to me so quickly. I have tried what you said and with the delays set at 1 millisecond, it is just enough to get the sounder to make a very faint noise. I have checked the sounder using a 555 timer at 5 Volts, and to get any reasonable sound output requires a fre...

Hello all I have downloaded flowcode today, and have been trying various things, but I am having a problem .I only have a PIC 16F84A, so any answers must be able to run on this particular chip. I want to make a bleep sound, using a piezoelectric sounder; this is the type without an internal drive ci...