Search found 78 matches

by sundgau
Sat Apr 02, 2022 4:35 pm
Forum: Formula AllCode
Topic: ‘RobotArmV2Macros' for appinventor and Labview
Replies: 1
Views: 6976

‘RobotArmV2Macros' for appinventor and Labview

Hi Benj, Hi Benj, would it be possible to have the right ".aia" file of the V2 version of the robotic arm (AllCode ARMv2) allowing to program under appinventor? The one given by the QRcode corresponds to the V1 version and there is only an example file "RobotArm2_Buttons.apk" in the ARMV2 resources....
by sundgau
Fri Jan 21, 2022 9:01 am
Forum: Formula AllCode
Topic: terminal to API Allcode to Hardware Allcode simulation
Replies: 3
Views: 3861

Re: terminal to API Allcode to Hardware Allcode simulation

Hello Benj,
Do you think you can answer my request?
Best regards

Bruno
by sundgau
Fri Dec 24, 2021 9:04 am
Forum: Formula AllCode
Topic: Reset Mloader
Replies: 5
Views: 5219

Re: Reset Mloader

Hi, I just tested 2 repairs on two of my allcode. The first one was to remove the 10uF smd C13 capacitor; this is very delicate and the tracks are very very fragile! You have to be very well equipped to do the maintenance. I damaged the track and I had to do a strap from the "Vcap" pin of the microc...
by sundgau
Wed Dec 15, 2021 5:17 pm
Forum: Formula AllCode
Topic: terminal to API Allcode to Hardware Allcode simulation
Replies: 3
Views: 3861

Re: terminal to API Allcode to Hardware Allcode simulation

Hi Benj, I would like to take advantage of all the macros in the api and act on the Allcode hardware. It would indeed require an additional function on the API interacting with the API Target method /Formula AllCode Sim functionality. This would allow to test all the codes with labview, python, flow...
by sundgau
Wed Dec 15, 2021 4:50 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

Thank you very much Benj.
I love this Formula allcode and your responsiveness with Flowcode V9
Best regards

Bruno
by sundgau
Tue Dec 14, 2021 11:28 am
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

Hello, I am now using Flowcode V9 and I have just noticed that there is no possibility to choose the IR sensor simulation mode. Screen Shot 12-14-21 at 11.17 AM.JPG The simulation on flowcode V7 gave excellent results to within 1mm. The measurements in real life also gave a rangefinder with an accur...
by sundgau
Tue Dec 14, 2021 11:16 am
Forum: Formula AllCode
Topic: terminal to API Allcode to Hardware Allcode simulation
Replies: 3
Views: 3861

terminal to API Allcode to Hardware Allcode simulation

Hello, would it be possible to have a modification of the Formula AllCode API so that we can send an external command in USBserial and transfer it to the Formula AllCode hardware in simulation. The idea is to be able to test the commands coming from a terminal (here Termite) or from a windows applic...
by sundgau
Mon Jan 04, 2021 2:53 pm
Forum: Formula AllCode
Topic: Reset Mloader
Replies: 5
Views: 5219

Re: Reset Mloader

Miracle of the beginning of the year ! Thank you Ben.
They all came back to life!
Now my students will get their allcode on the classroom radiator!
Is there a repair solution (change of very specific SMD electrochemical capacitors)?

Bruno
by sundgau
Mon Jan 04, 2021 1:37 pm
Forum: Formula AllCode
Topic: Reset Mloader
Replies: 5
Views: 5219

Re: Reset Mloader

They have all worked fine since 2012-2017. The recharge works and the BT connection too. I have just compared the signal at the terminals of the capacitor C28 of two allcodes and they seem identical: same rise time and maximum voltage. I'll try to keep them warm! But this is not a lasting solution ....
by sundgau
Mon Jan 04, 2021 11:37 am
Forum: Formula AllCode
Topic: Reset Mloader
Replies: 5
Views: 5219

Reset Mloader

Hello,
I have 3 allcode out of 11 which cannot be programmed anymore; the red led no longer flashes. I can no longer program them either in USB or in Bluetooth. Is it about the 10uF reset capacitor C28? Can you confirm it to me?
Best regards and happy new year!
Bruno
by sundgau
Sat Dec 05, 2020 4:23 pm
Forum: Flowcode V8
Topic: WS2812B compilation problems.
Replies: 25
Views: 10215

Re: WS2812B compilation problems.

Hello, I am doing tests with a RGB WX2812B and an ECIO40. The test programs work, but the signals at the oscilloscope do not match at all. Here is a statement for a ring of 8 LEDs all lit in red (G = 0, R = 255, B = 0). Everything seems correct but here are the measurements for the low states: T0H =...
by sundgau
Thu Oct 08, 2020 12:14 pm
Forum: Flowcode V7
Topic: continuous rotating servo model
Replies: 0
Views: 38531

continuous rotating servo model

Hello, Some time ago you modified the model of the "standard servo" and "micro Servo" in order to allow to reverse the direction of rotation according to the manufacturers and I thank you for that. Can you now make a new modification to simulate continuous rotating servo motors (with reverse). thank...
by sundgau
Fri Mar 13, 2020 1:30 pm
Forum: Flowcode V7
Topic: Model 3D STEP to Mesh
Replies: 3
Views: 3443

Re: Model 3D STEP to Mesh

Hello, I still haven't solved this problem. Do you have a suggestion for me? The following popup window does not open and flowcode does not convert 3d files to a "mesh" file, so no link is created in "mesh". I can, however, upload a mesh file created with another PC! Screen Shot 03-13-20 at 01.01 PM...
by sundgau
Tue Feb 18, 2020 3:28 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

Hello, back for a second modeling of IR sensors. First of all, a small modification concerning the exponential type equation: the equation which is best suited for a distance range from 15mm to 170mm is rather N = 2991 * exp (-0.04 * d) with d in mm. The coefficient of determination R² is 0.957. (I ...
by sundgau
Thu Feb 06, 2020 5:39 am
Forum: Flowcode V7
Topic: Model 3D STEP to Mesh
Replies: 3
Views: 3443

Model 3D STEP to Mesh

Hello, on a pc, the conversion of STEP file to mesh works well but the converter does not launch on the second PC and the result is an image without link Screen Shot 02-06-20 at 05.17 AM.PNG ... I tried to inhibit the anti-virus, reinstall flowcode but nothing helps! An idea? thank you in advance Br...
by sundgau
Mon Jan 20, 2020 3:40 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

great! I still have two questions Does the "IR simulation mode" parameter also work with line following sensors or only with distance sensors? What documents, video or tutorial help you understand how to modify a component such as the "Formula AllCode API" knowing that this component can be linked t...
by sundgau
Mon Jan 20, 2020 2:49 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

My version of flowcode is 7.3.0.7 and I am using the update of the formula flowcode API component obtained here:
viewtopic.php?f=41&t=21574
by sundgau
Mon Jan 20, 2020 2:34 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

Ok, FA component appears as a white square with my file but i can't add the formula allcode API component
by sundgau
Mon Jan 20, 2020 2:24 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

maybe "unlock"...
by sundgau
Mon Jan 20, 2020 2:15 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

sorry but the component no longer appears in the components bar, nor in the search bar.
I unlocked the file, put it in the "components" directory and restarted Flowcode ...
by sundgau
Mon Jan 20, 2020 1:14 pm
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

Re: IR sensor exponential response

I'm on flowcode7. Thank you so much!
by sundgau
Mon Jan 20, 2020 11:57 am
Forum: Formula AllCode
Topic: IR sensor exponential response
Replies: 16
Views: 13674

IR sensor exponential response

Hello Benj, I am currently working on the infrared sensor of the allcode. In simulation, the response is linear and responds to the equation: IR = 4290-3*distance. In practice, the answer is of exponential type and responds to an equation IR = 4890 * exp (-0.57 * distance), then I modify my program ...
by sundgau
Wed Nov 27, 2019 8:52 am
Forum: Formula AllCode
Topic: IRSensor & LineSensor
Replies: 4
Views: 5688

Re: IRSensor & LineSensor

Hello,
Everything seems to work perfectly. Thanks again
Bruno
by sundgau
Tue Nov 26, 2019 1:29 pm
Forum: Bug reports
Topic: Click event
Replies: 2
Views: 4226

Re: Click event

It still does not work...
I do not understand where it comes from
by sundgau
Tue Nov 26, 2019 8:08 am
Forum: Bug reports
Topic: Click event
Replies: 2
Views: 4226

Click event

Hello Benj, I have a problem with simulating a click event and moving an object. Execution of the event macro does not respect the time (1s) between the two object movement functions and executes the two functions after 2s! It works fine if I do a test with a non-event macro. Am I doing something wr...