Search found 18 matches

by aerostar
Fri Dec 26, 2014 6:09 am
Forum: Electronics products
Topic: mLoader
Replies: 6
Views: 12218

Re: mLoader

I am able to program the devices supported by PPPV3, using PPPV3; but Mloader does not program any of the chips. I guess Mloader is not compatible with Eb006V8, which is the board I have. (its just that the project I am working on will work better at 64Mhz(effectively 16MHz) compared to 48MHz and Oh...
by aerostar
Wed Dec 24, 2014 11:30 pm
Forum: Electronics products
Topic: mLoader
Replies: 6
Views: 12218

mLoader

Hi all, I am trying to use and older version of the eboard (with mLoader) to program a PIC26k22. I keep getting errors. I have gone through the forums and it seems people hare or are having same problem (even with the latest version of the pic programming board). I have tried most sugestion but no s...
by aerostar
Fri Mar 15, 2013 2:07 am
Forum: E-blocks
Topic: PPP3 Driver for WIndows 8
Replies: 7
Views: 8515

Re: PPP3 Driver for WIndows 8

dazz wrote:HI
you just need to disable driver signing (plenty of how to's on Google) , then istall as admin and it will work
Regards
Dazz
Thanks, it worked (I used files from a third party website).
by aerostar
Thu Mar 14, 2013 7:24 pm
Forum: E-blocks
Topic: PPP3 Driver for WIndows 8
Replies: 7
Views: 8515

Re: PPP3 Driver for WIndows 8

Still no drivers for windows 8 64 bit
by aerostar
Sun Oct 28, 2012 9:10 pm
Forum: E-blocks
Topic: PPP3 Driver for WIndows 8
Replies: 7
Views: 8515

Re: PPP3 Driver for WIndows 8

Thanks a million.
by aerostar
Sun Oct 28, 2012 7:02 pm
Forum: E-blocks
Topic: PPP3 Driver for WIndows 8
Replies: 7
Views: 8515

PPP3 Driver for WIndows 8

Is there plans to update the driver (PPP3) for EB006 programmer for windows 8? I have tried it on the new OS - it works well on 32 bit but does not work on the 64 bit.
by aerostar
Fri Oct 26, 2012 4:48 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Hello, The chips had been fried, probably due to back EMF from your motor. Are you using protection diodes across the motor windings? The board however was in full working order which is why I returned it to you with a new 16F88 device inserted. This page seems to offer some good suggestions for pr...
by aerostar
Thu Oct 25, 2012 3:09 am
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

DavidA wrote:Hello,

Regardless of whether the chip is fried or not, the case in point is that the board is fine. My colleague Ben who has your board is off today, so you may have to wait for a reply.
ok
by aerostar
Tue Oct 23, 2012 5:21 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Enamul wrote:I see but why he was saying that the board can't detect chip then..strange :!:
The PIC16f877a I sent with the unit is fried did u test it? it DOES NOT ACCEPT codes!
by aerostar
Tue Oct 23, 2012 2:00 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Please let me state, this is why we do these checks, next time can you please follow the instructions we set out so we can ensure next time that the board is actually damaged. Thanks. Please and please, test it wuth a pic16f877a. It sure did not work with one of those. Plleeeeaassee There was no ou...
by aerostar
Tue Oct 23, 2012 1:26 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Please let me state, this is why we do these checks, next time can you please follow the instructions we set out so we can ensure next time that the board is actually damaged. Thanks. Please and please, test it wuth a pic16f877a. It sure did not work with one of those. Plleeeeaassee There was no ou...
by aerostar
Tue Oct 23, 2012 1:25 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

DavidA wrote:Please let me state, this is why we do these checks, next time can you please follow the instructions we set out so we can ensure next time that the board is actually damaged.
Thanks.
Please and please, test it wuth a pic16f877a. It sure did not work with one of those. Plleeeeaassee
by aerostar
Thu Oct 18, 2012 1:57 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Hello, It does sound then like you have fried the board, and as such it is very unlikely to be able to be repaired or any repair costs incurred would be more than the board is worth. Thanks David, I do not know why it has taken this long to explain. (Maybe my English is not very good). Please when ...
by aerostar
Thu Oct 18, 2012 11:13 am
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

The program you posted is in asm..That means you don't use flowcode for programming. You said you have tried flasher program using free version of flowcode..Can you post that program or you don't sure what to do we can post for you. If you open flowcode you will see in the menu..Bulid>Project Optio...
by aerostar
Wed Oct 17, 2012 6:16 pm
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Hello, Have you tried with a simple LED flasher to see if your board is working? I would download a free version of Flowcode v5 to test it, as it is designed to work with the EB006. Yes I have and it is not working. Please I can I send it so that you can take a look? I have been using the board and...
by aerostar
Wed Oct 10, 2012 11:26 am
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Enamul wrote:Are you using EB006 board? Which chip you are using and please post the program you are trying to write..
EB006 - yes
P - 16F877A
by aerostar
Wed Oct 10, 2012 11:24 am
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

Re: No OUTPUT

Hello, My guess is that the chip config either has not been assigned or has been setup incorrectly and this is why the chip is not running. Please can you attach your source code so we can see what your trying to do. The chip configuration is ok I will give you the code - I am using it to test a st...
by aerostar
Wed Oct 10, 2012 10:21 am
Forum: E-blocks
Topic: No OUTPUT
Replies: 21
Views: 10705

No OUTPUT

My E-board is not giving any output. I guess it's "fried" what should I do? (The chip on it presently does not 'accept' programs however when I use a different one, it's programmed successfully but no output). I will really appreciate if you can help me. thanks.