Matrix user forums

Hi Benj,
Hardware wise I have ECIO 40P, EB069 wireless lan, Arduino Starter Kit.

Thanks
Rick

I am upgrading to flowcode 6 pro from flowcode 5 pro, I have the PIC and the AVR/arduino chip sets. Does anyone have a link or instructions on how to start a fresh install, including the drivers I will need and which directories they would need to be installed in. I am using windows Vista 64 bit. I ...

Sefi,
Thankyou, I will look into the thread. This is my first GLCD project and I am just overwhelmed compared to LCD programing.
Rick

Mr. John. I have purchased the EB076 GLCD board. I am interfacing it with ECIO-40P ( PIC18) and not using the multi programmer. Therefore, I am not using the DB9 as the pinout diagram is confusing, instead I have connected the ECIO to the display serial port. Every thing seems to be working fine, I ...

Thank you Mr John.
I will definitly look into this. Hope all goes well.

I would like to know the differnt type of touch glcd controllers, libraries, comunication Method (I2C, SPI, Parallel) that can best be used for the ECIO40P and flow code 5.X Pro. Are there crtain type of controllers that FC is more directd to. I am trying to make a touch screen graphics display with...

Good evening Pete.

I took your approach word for word to reinstalling the ECIO40P driver and it worked the first time. In less than five minutes.
Thank you so much. Thank you David also.
Rick.

Pete, I appreciate you sharing this information. I will definitly try this today. I was up till 2:00 am trying to figure this out. I am in California and so by the time I try your approch several hours will have passed. In the event the above does not work, is there a directory or directories where ...

As an Unknown device.

I had originally installed the ECIO40P Driver and the vista 64 computer recognized and every thing was working correctly I was able to download to the ECIO. Today I installed Flowkit and evey thing went haywire. When I reconnected the ECIO40P Vista asks for the driver and when I point to the Drver s...

I recently purchased the Prostation Bread Board which did not come with a power supply. Is it supposed to ? If not I will build my own but need to know the wiring of the din socket as to the input voltages and corresponding pins or does it only take +12V and -12V and the on board voltage regulators ...

Thankyou

Thankyou
I will check back for an update Nextweek.

I have down loaded a source file from microchip site for the RTCC pictail board that I have purchased. Is there a way to import this into flow code and add it as a macro or library function that I can call from flowcode and send to the controlling hardware.
Thanks,
Rick

Hi
has anyone had issues with Compare$(,,) function used in flowcode 5. It seems no matter wahat the result remains the same (Valid).

Thanks,
Rick

Hi Enamul, Well appreciated
Thankyou.

Hi,
Does any one know how to interface any of the pic micro real time clock calender chip using flow code 5?
Where can I find this information?
Thanks