Hello Viktor and Chipfryer27
This is a treat getting help in making the project work.
I have a flip PIC drawing
I use the LCD 8 pin have not SSD 2pin
I will work out the design. I ordered the Solenoid from China so it will be hopefully by end of April.
John
Search found 537 matches
- Fri Mar 17, 2023 11:27 pm
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
- Fri Mar 17, 2023 10:19 pm
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Hi Viktor
Excellent design.
Question
1. On the PNP won't the relay be on for say 5ms sending a Logic 1 to BO ?
2. How to detect when B0 is high when sending info to the LCD or ( SSD1306 )
will play on the bread board and see how it works.
Thank you
John
Excellent design.
Question
1. On the PNP won't the relay be on for say 5ms sending a Logic 1 to BO ?
2. How to detect when B0 is high when sending info to the LCD or ( SSD1306 )
will play on the bread board and see how it works.
Thank you
John
- Fri Mar 17, 2023 2:09 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Hello Kersing Just wondering, why not connect the P1 signal to B1 and skip the additional components? Or connect an infrared detector/sensitive photodiode to the PIC to detect the coin? The Circuit boards for the Photo diode and the P1 were from a earlier projects for a Pinball Machine I worked on. ...
- Fri Mar 17, 2023 1:07 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Hi Viktor Can you please give a bit more information. I hope This picture will help Token to PIC.jpg I can change the Port On Item (D) to RB0 to help with trigger. The Item D is the input that Is Logic 0 input The input B0 is like a Push Button Example The solenoid is mounted in the back of the Pach...
- Wed Mar 15, 2023 12:27 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
I have really appreciated the Flowcode 40 version 8. Question A) Does your relay has NO and NC contacts? - The relay is NO until the P1 Input goes low from the coin detector. B) Looks like you have the Pachinko machine. - Yes C) Can I ask you what model is it? Its a 1977 - Sanko D) Do you try to rep...
- Tue Mar 14, 2023 6:35 pm
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Excellent design Viktor_au I noticed you used the DashBoard Panel. Not sure why but when I press the Button or the switch the B1 does not trigger? Did it work on your Flowcode ? The action hoping for is During the LCD listing information and B1 is going from Logic 1 to Logic 0 the Macro "Coin Detect...
- Tue Mar 14, 2023 6:22 pm
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Token route.png Hello Viktor_au When a Token is put in the coin shut it falls out the bottom by to Infrared detectors that send a pulse to a PNP transistor and a 5v relay sends a Grd (Logic 0) to the PIC16F1937 In the PIC16F1937 I list procedure for game players to put in a token and I was trying t...
- Tue Mar 14, 2023 2:03 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Hi Chipfryer27
Here is a quick drawing of the process.
The red section is the Mystery.
Here is a quick drawing of the process.
The red section is the Mystery.
- Tue Mar 14, 2023 1:41 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Thank you Chipfryer27 The summary is the Port B1 incoming signal is Logic 0 . Step 1. With B1 is High Logic 1 (From a 10K resistor to VCC) Step 2 Display text on the LCD Step 3 ----- Trying to trigger B1 Step 4 -- Trigger on B1 from Logic 1 to Logic 0. Step 5 - When B1 goes Low I would then run code...
- Mon Mar 13, 2023 1:57 am
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Re: Pushbutton Trigger
Thank you
I might have tried all settings and made a mess.
RB1 is the incoming signal for the Coin activation and the Servo is connected to B0.
John
I might have tried all settings and made a mess.
RB1 is the incoming signal for the Coin activation and the Servo is connected to B0.
John
- Sun Mar 12, 2023 6:59 pm
- Forum: Flowcode V6
- Topic: Pushbutton Trigger
- Replies: 23
- Views: 236934
Pushbutton Trigger
Hello all. Its been about 2yrs since I have been working in PIC world. I have a simple project that I need help in seeing what I'm missing to press a button and trigger a action. I tried to determine what is happening by putting a slide switch but no control happened ? What I would like to see is pr...
- Fri Jun 26, 2020 7:23 pm
- Forum: Flowcode V6
- Topic: OLED Design
- Replies: 7
- Views: 8376
Re: OLED Design
Hi All I have the Oled wired in with 1K resistors from the PIC to the OLED. Noticed on some Google searches suggested because the PIC ports are Logic 1 at 5V. The OLED lights up. In flowcode The OLED should display "OLED Design" When all is working the OLED design should be working like the LCD did ...
- Thu Jun 25, 2020 11:59 pm
- Forum: Flowcode V6
- Topic: OLED Design
- Replies: 7
- Views: 8376
Re: OLED Design
Hello Martin
Yes long hours and not counting past 5.
Here is the new and improved 1sec timer.
Now I just have to work on the OLED.
Would there be a issue where in Flowcode the OLED is SSD1351 and on the Hardware I have a Driver ST7735 OLED.
The ST7735 has the same pin layout.
John
Yes long hours and not counting past 5.
Here is the new and improved 1sec timer.
Now I just have to work on the OLED.
Would there be a issue where in Flowcode the OLED is SSD1351 and on the Hardware I have a Driver ST7735 OLED.
The ST7735 has the same pin layout.
John
- Wed Jun 24, 2020 8:19 pm
- Forum: Flowcode V6
- Topic: OLED Design
- Replies: 7
- Views: 8376
Re: OLED Design
Forgot the Flowcode
- Wed Jun 24, 2020 8:16 pm
- Forum: Flowcode V6
- Topic: OLED Design
- Replies: 7
- Views: 8376
Re: OLED Design
Hi Martin Got the 1sec timer set. Looks like it is running at 100ms Here is the picture Odd this Flowcode was running with a LCD and I thought I could replace the LCD display to OLED display. Reading up on the PIC16 it reference is 32mhz speed for inter oscillator . Thoughts ? John -----------------...
- Tue Jun 23, 2020 10:11 pm
- Forum: Flowcode V6
- Topic: OLED Design
- Replies: 7
- Views: 8376
OLED Design
Hello All I had a opportunity to get a could of OLED displays. I added to my exiting LCD design with removal of the LCD calls. I went with the SPI layout because the 12C used to much memory. I was able to work out the Flowcode 6 Design but I can't get the OLED to display anything. I was using the GL...
- Sun Sep 22, 2019 6:23 pm
- Forum: Flowcode V6
- Topic: PIC18F26K80 not working in the real world
- Replies: 8
- Views: 9256
Re: PIC18F26K80 not working in the real world
Thank you all it is now working as you suggested
John
John
- Sun Sep 22, 2019 6:21 pm
- Forum: Flowcode V6
- Topic: pIC18F26K80 mystery
- Replies: 3
- Views: 5148
Re: pIC18F26K80 mystery
Thank you all for your time with this mystery.
- Fri Aug 30, 2019 5:46 pm
- Forum: Flowcode V6
- Topic: pIC18F26K80 mystery
- Replies: 3
- Views: 5148
Re: pIC18F26K80 mystery
Hello Benj Thank you for helping me figure how to make the PIC18F26K80 work. I looked and almost every possible PIC 16 & 18 that would work in Flowcode and The PIC18F26K80 has the most Ram and my design has reached such a need. I think the answer is the PIC18 is lacking the I/O ports that work with ...
- Sat Aug 24, 2019 3:01 am
- Forum: Flowcode V6
- Topic: pIC18F26K80 mystery
- Replies: 3
- Views: 5148
pIC18F26K80 mystery
Hello Have a odd experiment with my PIC18F26K80 ? I'm having trouble with RC5 ? I'm using C5 as a Output for my MOSI connection to a NFR905 and I can't get it to work. I'm sending C5 a Logic 1 (on) and then 5 sec send Logic 0. I have a LED on my bread board and C5 will not trigger. Now from the docu...
- Thu Aug 15, 2019 5:26 pm
- Forum: Flowcode V6
- Topic: PIC18F26K80 not working in the real world
- Replies: 8
- Views: 9256
Re: PIC18F26K80 not working in the real world
Thank you Martin
I set the values as you indicted and I have 1 second LED pulse
Off to see if my PIC will run my code.
Back soon.
John
I set the values as you indicted and I have 1 second LED pulse
Off to see if my PIC will run my code.
Back soon.
John
- Wed Aug 14, 2019 5:06 pm
- Forum: Flowcode V6
- Topic: PIC18F26K80 not working in the real world
- Replies: 8
- Views: 9256
Re: PIC18F26K80 not working in the real world
Hi Martin My apologias on not following the 1 sec timer. I had the thought it stayed in the program all the time. I think I have a glitch in my design. The led is on for 6 seconds. I have attached my Flowcode. I have the text for the Osccon but it is for the PI16F66K80. Can't find the 26K80. I use t...
- Sat Aug 10, 2019 4:31 am
- Forum: Flowcode V6
- Topic: PIC18F26K80 not working in the real world
- Replies: 8
- Views: 9256
Re: PIC18F26K80 not working in the real world
Thank you Benj
I have attached my Flowcode and I will check out the settings.
Thank you for your time
John
I have attached my Flowcode and I will check out the settings.
Thank you for your time
John
- Fri Aug 09, 2019 5:00 pm
- Forum: Flowcode V6
- Topic: PIC18F26K80 not working in the real world
- Replies: 8
- Views: 9256
PIC18F26K80 not working in the real world
I have been Trying and trying to get the PIC18F26K0 to work with NFR905 with LCD Yes I can program but it will not receive from the Master TX. I think it is related to the PIC18 overall purpose. I have included a Pin Allocation design. The PIC18 loads and I see the 'Main Page" and then the program j...
- Thu Aug 01, 2019 10:20 pm
- Forum: Flowcode V6
- Topic: New to PicKit 3
- Replies: 19
- Views: 14083
Re: New to PicKit 3
Thank you all for your support in making it happen
With setting FC default OFF I was able to generate a Hex file.
Then I used MPLAB and it loaded my design. My Design needs a little work but I have a plan.
All the best to all.
John
With setting FC default OFF I was able to generate a Hex file.
Then I used MPLAB and it loaded my design. My Design needs a little work but I have a plan.
All the best to all.
John