Matrix user forums

Hello I'm working on making two RFM95W 868 Mhz Lora modules exchange data. Short distance, side by side first. I went through all the registry settings and configured the macros based on the FC Lora component framework. The register values are similar but not all, so I let the annotations on every o...

Hello!

If I got the SAF area right, that is, it's related to emulated EE in flash, you can use this page to mark that specific capability and find out the models that have it. And all others caracteristic too...

https://www.microchip.com/maps/microcontroller.aspx

Happy newyear!
Cheers!
Balles

The possibilities...

http://ww1.microchip.com/downloads/en/a ... 01375a.pdf

Hello Ben,

what would be your suggestion to use that functionality of those pic micros?
There is a lot of registre settings, would it be possibly to have a FC8 component?

It seems to have a wide range application possibilities.

Thanks!

Getting it back to working made me I little more curious and I've got deeper... After I made some backups, tried something more agressive. Got it working and the results are little bit disapointing. Using Pic 18f4550 this result came out: - 1.45 free (original version that came with FC) : 58.6% mem ...

Hello!! @LeighM: yes, i didn't mess with the original installed files. @Benj: even pointing to the the original xc8.exe (v1.45 free) file, it didn't worked out. After some time just managed to get it back working with the original xc8 1.45 free, using the batch file setup info. "$(compilerpic)batch\...

Hello! Can please someone help me on how to change the compiler config parameters, to try out xc8 pro mode over the trial time? I want to learn the real diference of 60% smaller and 400% faster code. I've changed the compiler location to the installed xc8.exe file but it doesn't compile. Got error 9...

Dear Jonny there is no how to thank you, cause i'm not one buyer of flowcode till now. And even so you gave support to my requests or opinions on the new V6, you made it looks more like V5 when i and others blame out the new interface. I'm still fighting with knifes on my teeths, with my MD to get t...

Hello Dazz thanks but, if you read my post i've posted that the selected component goes right to the dashboard, i'm asking just to gray out the double option that appears on the component bar, cause the "Add to System panel" is no longer needed, cause it's disabled. Of course if it can be easily don...

Hello Jonny! Great job with the interface you have done!!! It looks now very close to the previous V5. I just want to suggest to gray out (or remove) the system panel option on the components tool bar, when the system panel is disabled, as it appears on the view menu. If possible of course, see pict...

Dear Carl, i taked a fast look on your flowchart and as i see, it's working as you're expecting. It counts till 100 and then reset the counter. It just does not reset the display after reach 100. It's not counting till 199, that number 1 you see in front the 99 is the 1 showed when count = 1 00. You...

Great news Jonny!!

Thanks a lot, when comes out the new patch?
I'm truly curious!!

Cheers!!

Got it! Thanks for that balles. Welcome Professor Martin!!! :D And many thanks for the input on the scope, things are there but sometimes hard to find in V6. I can't seem to drag the red cursor from it's place. MJU You need to drag it into the window of the scope, not on the bar where is the triang...

Hello Jonny, Martin; The scope is working as Jonny's picture on above post, Martin the cursors are hide on the extreme right border of the scope view, click on the border (even if you don't see anything) and drag it to the center of the window. But guys sorry, how did the scope be assigned for the P...

Thank you Jonny for that effort! I know that you guys will find some way to do it, even if it take some time. MM team is good to find the balance, happened before!! As i see the system panel is ok, dosen't need option to disable it cause it can be switched on the view menu. At all the system panel i...

Hi Paul, i'll not write much about it, cause i done it before on other topics. But i see always the same request about interface, like that from DieterM, and Brendan. The problem with the dashboard are these position buttons, control buttons and the rulers. The visual of the dashboarde is to heavy, ...

Hello Paul, Well i just need to keep some info safe about this project and you may understand it. The most of the sensors are on the market nothing special. There are sensors for light intensity, infrared sensors, atmosphere pressure, wind speed and direction, soil moisture, environmental temperatur...

Dear Paul, i'm pretty new to flowcode, in fact i've tested the trial version and it ended to fast, so now i'm waiting for finance to buy it. It should happens till december. :D My interest is to read a dozen sensors signals of weather and transmit them. The aplication of it is transmit the info for ...

the idea behind the injector component is that it injects the remote end of the communications i.e. the module you are communicating with so you can get valid responses etc. Following this scenario it's possible to have one usb injector for the next releases? It will be pleasant to try it, just nee...

Hi Benj, I understand your point here, and agree. And Hid is not easy to play with. Maybe i didn't made myself clear or didn't understand some points over the injector's features. So please be patient. The injector is for simulation purpose. So on the RS232 example i can type in chars or numerical v...

Hello Benj, My intention about asking for the injector is to know how to simulate usb slave or HID to one pc running C# software? And looking your example of RS232, it seems to me that the injector for usb would be one great tool. So if there is one way to do this simulation, please can you show me?...

Hello! I like the way you show it, couldn't think on a better way, they just are tiny. And sorry i can't see how do to show them better with this size. There are two tabs where they are presented, on the tab "Human Inteface Data" it's more easy to read them cause the space between is bigger. On the ...

I agree with Larry, works very nice, but needs fast fingers! :D Benj two questions, is there a way to improve the UART display mode? On the ASC mode the numbers are clear, but on the new numeric format they are so tiny i can't read them. This human injector is a great tool, i looked for a way to use...

Hello guys,

Wolfgang is talking about shadows.
So he got the grid on and it shows the flowcharts shadows.
If he zoom in the flowchart it's better to note it, instead the default zoom level.

Cheers!

Hello Martin!

Thanks a lot!! I never put the mouse pointer on that little down arrow!!
This is very near on what i was thinking about, and was there all the time!!

Thanks to Jac too, i didn't understood the place of the option he was talking about.
Ok, it's done, close the topic.

Cheers!