Matrix user forums

That did it !

Thanks,
Dave

My display settings are at 100%

DC

Has anyone seen this problem with the font size in popup windows?
This only shows up for me when running FC on my Surface Pro.
Running on my Desktop PC all is good.

Thanks,
Dave

Ben,

I checkout INT0 and INT1 and they both work now in simulation and hardware.
Thanks for the fix!

Dave

OK,

I'll check it out.

Thanks,
Dave

Ben,

Any updates on this problem?

Thanks,
Dave

Taking a look at the PIC18F45K40.
INT0 simulates fine and programs to hardware.
INT1 and INT2 both do not simulate or program to hardware.
Hope this is an easy one.

Thanks,
Dave

Has there been any luck with this Remapping issue?

Thanks,
Dave

Ben,

Sorry to report things are still not working.
Tried AN1 and AN16
Verified voltage on A/D input pins

A/D Setup
VDD
Fosc/32
40

Thanks,
Dave

Ben,

Sorry to push ...
Do you know if this issue will be resolved soon?
Should I pick another Chip to develop with or move it to MPLab.

Thanks,
Dave

Has there been any movement on this issue?

Thanks,
Dave

For a reality check I swapped out the PIC18F45Q10 with a PIC18F45K40
and the ADC works correctly including the FVR register.

The Chips are functionally similar so it looks like there is a real issue with the PIC18F45Q10 part.

Thanks,
Dave

I have not got to trying FVR yet but I see it in the Drop down. I expect to need a C code block to select the FVR voltage. For now I am just doing a simple test to check the ADC functionality. Reference is Vdd, Pin An19 Just reading a slide pot with "GetInt" and displaying the result on a display. F...

Using the PIC18F45Q10 and the ADC is not working in Hardware.
Simulation is fine inside of flowcode.
I had a similar problem with the ADC on the PIC18F25Q10 part.
Hopefully it is a similar solution.

Thanks,
Dave

Ben,

Chl2 can be remapped to other pins on PortB and things work fine.
Remapping to PortD is the problem

Thanks,
Dave

Ben,

Thanks for checking on this for me.
Definitely made progress.
Chl1 and Chl2 now work good in their default pin locations.
Last problem is that when I remap the pins from the default Chl2 (SDA-RB2 and SCL-RB1) to (SDA-RD3 and SCL-RD2) it does not work.

Thanks,
Dave

Any update on the non functioning I2C channels?
Sorry to push but I need to get this project moving.

Thanks,
Dave

I give up on this one.....
How do I move this to the Bug Forum

Thanks,
Dave

Martin,

Updated PIC18F45Q10
Wired the display directly to Chl1 RC3 and RC4.
The display works in Software mode only.
Selecting Chl1 SDA and SCL line remain High.

Thanks,
Dave

Martin, I am trying to use the SSD1306 component on I2C Channel2 with the PIC18F45Q10. Pins Mapped to SCL RD2 and SDA RD3. The simulation is fine but when programmed to hardware the display does not work. The SDA and SCL line remain High. Didn't work in software mode either. In another post a simila...

Moved the TMR0 LED to PORTB and it seems happy now.

Dave

Martin, Attached are 2 flowcharts Both simulate fine in flowcode. "Test2" seems to work fine programmed to hardware. "LED_Flash" adds some minor complexity to the interrupt routines and main loop. The TMR0 led flash struggles to stay in sync when programmed to hardware. Could be some type of program...

The signals look good. I am using Eblocks boards EB083 and EB006V9 Programming with PicKit3 plugged into the EB006V9 The Switch signals do fall short of 5V only swinging to 3.1V at the PIC EB083 is unmodified. Weird thing is that if I write a program to toogle an LED every 1 sec in the TMR0 interupt...

I had a chance to play with this a bit now. INT0 seems to work OK by itself. INT1 by itself or along with INT0 is very erratic. Sometimes triggering sometimes not. If I add a tMR0 interrupt to the mix things get worst. I think there is more going on here. Let me know if you want me to try anything s...

Tested INT0 and INT1 and they seem to work with the hardware.
I'll give a good go on Monday

Thanks,
Dave