Matrix user forums

I've been trying to read a file from a SD card without much success on my own so I downloaded the example file (FAT Read_File.fcfx) from the main site. I then downloaded the code (without any modification) onto an ECIO40P. The program ran but stuck with the message "Waiting for Card" on the LCD. Aft...

I've got a problem using the ICD/Ghost. ICD works when using the default pins (RB6/RB7) but crashes with anything else (see error.jpg). [attachment=1]error.jpg[/attachment] I'm only running a simple 'flash an LED' program on a PIC16F877A (can't get much simpler) in Flowcode v6.1.0.0 (08.10.14) and a...

Hi Steve,
Sorry, but it isn't. I get the same datasheet for both links i.e. EB018-30-1, the one with the reset button both in the picture and in the schematic!
Regards,
Nick

Hi Ben,
Almost a year now and still the old datasheet is on the website. Any chance, at least, of emailing the circuit diagram? I've got a really weird fault and to fix it I NEED the schematic.

Hi, I've just taken delivery of some new CAN bus eBlocks (EB-018-00- 2 ). These are obviously version 2 of the board but I can find no datasheet on the website to support these and there are obviously some changes (e.g. no reset switch) . Any idea when we'll get the datasheets? I have to fix the thi...

Hi People, I'm having difficulties making the VGA port work.I've downloaded the both the zip file from the main website and the one from elsewhere in the forum (probably the same file) but neither will give me anything from my monitor. Equipment I'm using is as in the EB033 datasheet with a 10MHz cr...

Hi, I'd like to use the PIC16F687 in a project I am currently developing but it does not appear on any list of supported controllers in PPPV3 or eBlocks. I presume that this is due to the fact that it is a 20 pin device (that's also why I want to use it). I have noticed that the pinout of this contr...

Hi Steve, I have the same problem, I've written some very simple LED flashing code in Flow 3.1.0.31 with remarkably similar results. I've also tried with other hex code written with MPLAB and downloaded via PPPv3 (ver. 3.8.11.24), same result i.e. chip not programmed. In each case the "Use IncXCmd" ...