Search found 209 matches
- Thu Jul 03, 2014 6:50 pm
- Forum: Flowcode V6
- Topic: mLoader Error - Unknown Chip Type
- Replies: 5
- Views: 6348
HP-488 - PPP - Unknown Chip Type
Ben, The 16F886 is a supported chip for the HP-488 but when I try and program it using FC-6 v 6.0.9.0 it gives the pop up message: Matrix PIC Microprogrammer Unrecognised chip on Command Line <16F886> The chip is then programmed without any problem. So not an immediate problem as such, but you shoul...
- Wed Jun 25, 2014 4:08 pm
- Forum: Flowcode V6
- Topic: Flowcode v6.0.9 Live + Recent Major Bugs & Fixes
- Replies: 32
- Views: 22290
Re: Flowcode v6.0.9 Live
Thanks guys. Yes, problem with error 120 solved with a restart. I suggest forcing a restart after install as many programs do not require restart these days. Barge pole and Windows 8, Yes, I mistakenly installed the Windows 8.1 update. Not so much an update as yet another way of working. It insisted...
- Wed Jun 25, 2014 10:05 am
- Forum: Flowcode V6
- Topic: Flowcode v6.0.9 Live + Recent Major Bugs & Fixes
- Replies: 32
- Views: 22290
Re: Flowcode v6.0.9 Live - Installation Issue
Hi Ben, I have just downloaded Flowcode v6.0.7 and then overwritten with the v6.0.9 patch, registered the installation, imported a known good FC6 program. It compiles to C OK but when it tries to compile to hex I get the error code below. This is a second install on my laptop for doing fieldwork (so...
- Tue Jun 10, 2014 8:56 pm
- Forum: Flowcode V6
- Topic: PicKit3 Command Line Extensions - Power
- Replies: 2
- Views: 3373
Re: PicKit3 Command Line Extensions - Power
Hi Ben, Thanks for the fast response; adding -V5.0 works. For reference, at the Build - Compiler Options - Programmer entry we need: Location ...D:\Flowcodev6\tools\PICkit3\PK3CMD.exe (or whatever the system needs) Parameters -P$(chip) -F$(target).hex -E -M -V5.0 To cut a long story short I also tri...
- Tue Jun 10, 2014 7:05 pm
- Forum: Flowcode V6
- Topic: PicKit3 Command Line Extensions - Power
- Replies: 2
- Views: 3373
PicKit3 Command Line Extensions - Power
I have had a look at the excellent wiki (and trawled the Forum, so sorry if it already there). http://www.matrixtsl.com/wiki/index.php?title=Supporting_Third_Party_Programming_Tools and at the microchip datasheet (attached). From this I expected changing, the FC 6 Programmer Parameters to: -P$(chip)...
- Tue Jun 10, 2014 6:38 pm
- Forum: Flowcode V6
- Topic: Servo and Clock or PWM
- Replies: 3
- Views: 3119
Re: Servo and Clock or PWM
Thank you both, I expected that some clash of resources was on hand.
Mark
Mark
- Mon Jun 09, 2014 9:00 pm
- Forum: Flowcode V6
- Topic: Servo and Clock or PWM
- Replies: 3
- Views: 3119
Servo and Clock or PWM
Hi, I have successfully set up the servo component. On another project I have successfully used the PWM component. Trying the two together seems to stop either working properly. I therefor though of using a clock to provide the PWM. This has the servo jumping all over the place, whichever clock I us...
- Tue May 27, 2014 4:55 pm
- Forum: Formula Flowcode
- Topic: Flowcode 6 to Formula Flowcode
- Replies: 2
- Views: 10200
Re: Flowcode 6 to Formula Flowcode
Fine it works, thanks and thanks for the prompt reply.
Mark
Mark
- Mon May 26, 2014 7:44 pm
- Forum: Formula Flowcode
- Topic: Flowcode 6 to Formula Flowcode
- Replies: 2
- Views: 10200
Flowcode 6 to Formula Flowcode
Please provide a step-by-step for linking Flowcode 6 to Formula Flowcode. I selected 18F4455 and included the Formula Flowcode module. However, the programmer parameters are not present as a option (or are they?). The download for the USB driver is old, will it work with Windows 7, 64 bit? Whilst I ...
- Tue May 20, 2014 11:50 am
- Forum: Flowcode V6
- Topic: 18F46K22 Channel 2 PWM pin option not working
- Replies: 3
- Views: 3547
Re: 18F46K22 Channel 2 PWM pin option not working
Thanks, I will have a look.
The 18F46K22 timer 2 setup also does not work properly, it shows two prescalers but only one prescaler works (evidenced by the interrupt generated being way too fast). I used timer 6 instead and this works correctly.
Mark
The 18F46K22 timer 2 setup also does not work properly, it shows two prescalers but only one prescaler works (evidenced by the interrupt generated being way too fast). I used timer 6 instead and this works correctly.
Mark
- Sat May 10, 2014 10:47 am
- Forum: Flowcode V6
- Topic: 18F46K22 Channel 2 PWM pin option not working
- Replies: 3
- Views: 3547
Re: 18F46K22 Channel 2 PWM pin option not working
Some input on this one would be appreciated.
If nothing else, where can I find the set-up code so I can see what values are being placed in the registers?
If nothing else, where can I find the set-up code so I can see what values are being placed in the registers?
- Fri May 09, 2014 5:51 pm
- Forum: Flowcode V6
- Topic: Incrementing character string ASCII value
- Replies: 5
- Views: 4340
Re: Incrementing character string ASCII value
Thanks,
I have tried your suggestion (using [4] + 1) with the result:
test01.csv goes to
test0.csv then
test .csv
It looks like something more is going on than simply incrementing an ASCII value. I will post further if something comes to light which might be helpful to others.
I have tried your suggestion (using [4] + 1) with the result:
test01.csv goes to
test0.csv then
test .csv
It looks like something more is going on than simply incrementing an ASCII value. I will post further if something comes to light which might be helpful to others.
- Thu May 08, 2014 10:27 pm
- Forum: Flowcode V6
- Topic: Incrementing character string ASCII value
- Replies: 5
- Views: 4340
Incrementing character string ASCII value
Hi, I am taking an existing file name, ABC01, and if present already, wanting to create a new name ABC02 to stop overwriting. The file name is used in the FAT component. Hence, I assumed that I would chop off the last character, increment it by 1, ASCII for '1' = 49 to get '2' fron ASCII 50 and then...
- Mon Apr 21, 2014 11:33 am
- Forum: Flowcode V6
- Topic: 18F46K22 Channel 2 PWM pin option not working
- Replies: 3
- Views: 3547
18F46K22 Channel 2 PWM pin option not working
Hi, On the 18F46K22 Channel2 does not seem to output on C1, it outputs fine on the alternative of B3. Channel 1 works fine on C2. Channel 3 works fine on B5, not sure about E0. I have tried the solution of Jan at http://wwww.matrixmultimedia.com/mmforums/viewtopic.php?f=54&t=14564 but with no succes...
- Tue Apr 15, 2014 4:43 pm
- Forum: Flowcode V6
- Topic: Flowcode 6 Pickit3
- Replies: 18
- Views: 27826
Re: Flowcode 6 Pickit3
Hi Martin,
Yes, a simple as that, remove the space in the file name.
Thanks,
Yes, a simple as that, remove the space in the file name.
Thanks,
- Mon Apr 14, 2014 8:31 pm
- Forum: Flowcode V6
- Topic: Flowcode 6 Pickit3
- Replies: 18
- Views: 27826
Re: Flowcode 6 Pickit3
Ben, Using the code from the Wiki I get the error: Building CASM file etc.etc. success Launching the programmer... D:\Electronics\Flowcodev6\tools\PICkit3\PK3CMD.exe -P16F876 -F16F876 Skeleton.hex -E -M HEX File not found D:\Electronics\Flowcodev6\tools\PICkit3\PK3CMD.exe reported error code 1 FINIS...
- Fri Apr 11, 2014 8:15 am
- Forum: Flowcode V6
- Topic: Finding Registers set in Macro - RS232
- Replies: 1
- Views: 2198
Finding Registers set in Macro - RS232
Hi, I am setting up some basic RS232 comms as part of a project. I have not been able to get receive to work (send is OK) with a 16F88 but swapping (arbitrarily) to a 16F876 got it working okay with the same code. I've been using the Echo function. My question is, however, more general: in Flowcode ...
- Mon Mar 10, 2014 9:58 am
- Forum: Flowcode V6
- Topic: Flowcode v6 Tutorial Videos
- Replies: 3
- Views: 30810
Re: Flowcode v6 Tutorial Videos for v5 user
Hi Ben, I have just started with Flowcode 6 and am very impressed with the videos. Two initial reactions jump out for me, and therefore may be helpful to you. Whilst there is a video talking about the differences between Flowcode 5 and 6 I would like to see (maybe it is there already?) A hands-on ho...
- Sun Mar 02, 2014 4:37 pm
- Forum: E-blocks
- Topic: EB006 board. Onboard ship issues.
- Replies: 18
- Views: 18561
Re: EB006 board. Onboard ship issues.
Ben, This is just to refresh this thread as the solution below has solved a couple of similar issues for me. For me J11, J16 and J17 - just moving them (later reseating properly of course) did the trick. Hello, It might be worth unplugging the three way jumpers J29 and J12-J14 and reseating them in ...
- Tue Mar 19, 2013 8:27 pm
- Forum: Flowcode V5
- Topic: Accelerometer DataLogger
- Replies: 6
- Views: 6756
Re: Accelerometer DataLogger
John,
Thanks, I pinched your SD_Card setup macro as I could not get my card working on an EB037.
Works fine now - a platform to make my own routine.
Regards,
Mark
Thanks, I pinched your SD_Card setup macro as I could not get my card working on an EB037.
Works fine now - a platform to make my own routine.
Regards,
Mark
- Mon Mar 18, 2013 9:42 pm
- Forum: Flowcode V5
- Topic: Flowcode/e-blocks on TV
- Replies: 5
- Views: 5299
Flowcode/e-blocks on TV
Take a look at: http://www.bbc.co.uk/iplayer/search?q=You%20Too%20Can%20Be%20an%20Absolute%20Genius It is targeted for schools and valid for the next 5 days. About half way through, e-blocks programmed using Flowcode 5 are used. The heater is a 15ohm 1w resistor run off a relay using the 14v spur fr...
- Mon Mar 18, 2013 8:21 pm
- Forum: Flowcode V5
- Topic: EB037 error when using FAT Component
- Replies: 2
- Views: 2737
Re: EB037 error when using FAT Component
Ben,
Thanks, the error mesage has gone.
Mark
Thanks, the error mesage has gone.
Mark
- Sat Mar 16, 2013 11:16 pm
- Forum: Flowcode V5
- Topic: EB037 error when using FAT Component
- Replies: 2
- Views: 2737
EB037 error when using FAT Component
Hi, I have loaded the latest version of Flowcode 5.5.2.1 and have been trying to use the EB037. After trying the example programs (although not with the ECIO) as such and then trying with one of John Crow's dual temp logger (again using a PIC18F4455) and lastly trying a PIC 18F2610 with its simpler ...
- Sun Sep 16, 2012 9:14 pm
- Forum: Flowcode V5
- Topic: Flowcode V5.4 minor fixes
- Replies: 15
- Views: 28288
Re: Flowcode V5.4 minor fixes
And PIC18F47J53 further tweak on I2C Port 2.
http://www.matrixmultimedia.com/mmforum ... 167#p39603
Thanks Enamul for the original post.
Mark
http://www.matrixmultimedia.com/mmforum ... 167#p39603
Thanks Enamul for the original post.
Mark
- Sun Sep 16, 2012 9:10 pm
- Forum: Flowcode V5
- Topic: Flowcode v5.4 PIC18F47J53 Code Error
- Replies: 8
- Views: 7513
Re: Flowcode v5.4 PIC18F47J53 Code Error
Ben,
Thanks, works fine.
Mark
Thanks, works fine.
Mark