Search found 26 matches

by VladimirRepin
Tue Jul 16, 2019 11:44 am
Forum: E-blocks
Topic: E-blocks 2 RFID Board (BL0197)
Replies: 2
Views: 5298

Re: E-blocks 2 RFID Board (BL0197)

Thanks, it really works.

I think the problem was that I set TX to 0 and RX to 1, but I had to do the opposite (TX to 1 and RX to 0).
by VladimirRepin
Tue Jul 16, 2019 10:45 am
Forum: E-blocks
Topic: E-blocks 2 Actuators (BL0127)
Replies: 1
Views: 4441

E-blocks 2 Actuators (BL0127)

Hi, There is a difficulty with setting the Actuators (BL0127). I do not know what components to use, of those that are in Flowcode 8.2. I tried different components (attach a photo), but I could not get the result. And of course I set the port settings in accordance with the datasheet (for DC motor ...
by VladimirRepin
Mon Jul 15, 2019 4:27 pm
Forum: E-blocks
Topic: E-blocks 2 RFID Board (BL0197)
Replies: 2
Views: 5298

E-blocks 2 RFID Board (BL0197)

Hi, There is a problem with the RFID BL0197 component. This component is not initialized. The component was connected to the BL0011 Board to B and C ports. I used the RFID (EB052, RWD MICODE) component in Flowcode 8.2 and tried to set up different ports (B and C) in the connection setup. I set the T...
by VladimirRepin
Mon Jul 01, 2019 2:22 pm
Forum: E-blocks
Topic: E-blocks 2 Ethernet board BL0187
Replies: 2
Views: 5255

Re: E-blocks 2 Ethernet board BL0187

Thanks
by VladimirRepin
Thu Jun 27, 2019 9:24 am
Forum: E-blocks
Topic: E-blocks 2 Ethernet board BL0187
Replies: 2
Views: 5255

E-blocks 2 Ethernet board BL0187

Hi,

What components can I use with the Ethernet board?
Perhaps these are components from the Network section, but I don’t know which ones can I use.
by VladimirRepin
Fri Jun 07, 2019 6:12 pm
Forum: E-blocks
Topic: E-blocks 2 BL0011
Replies: 1
Views: 4892

Re: E-blocks 2 BL0011

Okay, I solved this problem.

You need to install the necessary drivers for the board.
When you updating drivers, you must manually select them in the Flowcode v8 / Drivers folder.
This solved the problem.

P.S. Do not forget to update Flowcode to the latest version.
by VladimirRepin
Thu Jun 06, 2019 12:02 pm
Forum: E-blocks
Topic: E-blocks 2 BL0011
Replies: 1
Views: 4892

E-blocks 2 BL0011

Hello There is a problem with BL0011. After connecting via USB, Windows sees it, but mLoader (v4) does not see, and when the program is recorded on the chip, a notification appears that the device is not connected. This result is in Flowcode 8.0 and 8.2. With BL0080 and PIC16F18877 there is no such ...
by VladimirRepin
Thu Jan 17, 2019 3:35 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hi,

I checked my devices.
The program display on screen "Coordinator" for one device (with a Coordinator mark on it)
and "End device" for another (with a Router/End mark on it).

Maybe you have a program that can connect Zigbee devices?
by VladimirRepin
Mon Jan 14, 2019 5:30 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hi.
Yes, I have two BL0080 boards and Zigbee Board BL0152 is connected to each of them.

I think it does not work. Can you confirm that Zigbee (eblocks 2) works in Flowcode 8?

Just send me at least one version of the program that can connect Zigbee (eblocks 2) together?
by VladimirRepin
Wed Dec 19, 2018 10:37 am
Forum: E-blocks
Topic: E-blocks 2 CAN Bus (BL0140)
Replies: 3
Views: 5747

Re: E-blocks 2 CAN Bus (BL0140)

Hello, I have a CAN Bus Board BL0140 from Eblocks2 and a small program using CAN(Internal, MCP2515) component macros, which I took from Comms. A component is initialized in the program, and since the initialization macro does not return anything, I check in another way work it or not. After initiali...
by VladimirRepin
Wed Dec 19, 2018 10:21 am
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hello, I tried your program, it did not work.The ConnectToCoordinator marco returns zero, regardless of whether a coordinator is turn on or not, so I tried to change the loop to wait for one (instead zero). But this also does not work, so I want to try other channels, as you suggested, but I don’t q...
by VladimirRepin
Sat Dec 08, 2018 1:07 pm
Forum: Flowcode V8
Topic: USB in Flowcode 8
Replies: 4
Views: 2977

Re: USB in Flowcode 8

Hi,

Here it is.
by VladimirRepin
Fri Dec 07, 2018 9:18 pm
Forum: Flowcode V8
Topic: USB in Flowcode 8
Replies: 4
Views: 2977

USB in Flowcode 8

Hi,

I have a problem with creating a program using USB component from E-blocks.
I have 18F4455 chip and Flowcode 8.
I cant compile a hex-file if I have any USB component(HID, Serial, ...) in the program. Even if I don't use macros.
Could you help me with my problem?

Thanks in advance for reply.
by VladimirRepin
Fri Dec 07, 2018 8:22 am
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hi,

Here are two files that I used.
In both the same PAN ID - 1234. And Scan channels only 0x0b and 0x15.
Coordinator led blinks, End device led just stays on.

They still dont connect
by VladimirRepin
Fri Nov 09, 2018 4:50 pm
Forum: E-blocks
Topic: EB to EB2 (BL0113-1)
Replies: 1
Views: 4877

EB to EB2 (BL0113-1)

Hello, I have a problem with connecting the Eblocks2-module to the Eblocks-board using an EB to EB2 adapter (BL0113-1). The adapter has three sockets (+V, 3V3, 5V) for wired connection, but hasn't ground socket (marked on the board as GND). I looked in the description of the BL0113 component, and th...
by VladimirRepin
Tue Oct 30, 2018 4:35 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hello,

They still dont connect together.
by VladimirRepin
Mon Oct 22, 2018 6:32 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Hi, I tried it in different ways, but I can not connect two zigbee modules between. Can you tell me what my problem is? Below are examples of programs that should allow me to connect devices (programs dont go out of the loop where the connection occurs). I tried macros ConnectToAll, ConnectToCoordin...
by VladimirRepin
Fri Oct 19, 2018 1:22 pm
Forum: E-blocks
Topic: E-blocks 2 Bluetooth (BL0170)
Replies: 6
Views: 7652

Re: E-blocks 2 Bluetooth (BL0170)

Hello , Can I use the WaitForValue macro when connecting to a module via a mobile device or PC? I could not detect the "CONNECT" value when connected via smartphone. Therefore, I wanted to know, how can I work with the module through the PC terminal? (if its possible) Thanks in advance for the answer
by VladimirRepin
Mon Oct 08, 2018 3:31 pm
Forum: E-blocks
Topic: E-blocks 2 Bluetooth (BL0170)
Replies: 6
Views: 7652

Re: E-blocks 2 Bluetooth (BL0170)

Bluetooth module BL0170 uses Microchip RN4677 AT commands, right?

I tried various commands from here :
http://ww1.microchip.com/downloads/en/D ... 02377A.pdf

But they do not work, it may be a matter of syntax.
Could you tell me how to work with AT commands correctly?
by VladimirRepin
Wed Oct 03, 2018 3:17 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

And here are the other two files for the same devices.
I tried to use ScanNetwork macro.
by VladimirRepin
Wed Oct 03, 2018 3:15 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Ok, there are two files - one for Zigbee Coordinator device, another for Zigbee End device.
What I tried to do, I already wrote above.
by VladimirRepin
Mon Sep 24, 2018 6:53 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

Re: E-blocks 2 Zigbee (BL0152)

Thank you for considering this issue, here are some details I had a problem with connecting the end device to the coordinator. In my case, there are two circuits, each made from the PIC MultiProgrammer BL0080, Combo Board BL0114 and Zigbee Board BL0152 components. In the first one, Zigbee is a Coord...
by VladimirRepin
Wed Sep 19, 2018 10:22 am
Forum: E-blocks
Topic: E-blocks 2 CAN Bus (BL0140)
Replies: 3
Views: 5747

E-blocks 2 CAN Bus (BL0140)

Hi,

I have a problem with CAN Bus from E-blocks 2.

There is no component CAN Bus BL0140 (E-blocks2) in FlowCode 8. The macros of compo

Is it possible to release an update with this component?

Thanks in advance for your help.
by VladimirRepin
Tue Sep 18, 2018 9:41 pm
Forum: E-blocks
Topic: E-blocks 2 Zigbee (BL0152)
Replies: 19
Views: 15263

E-blocks 2 Zigbee (BL0152)

Hi,

I have a problem which I hope you be able to solve.

There is no component Zigbee BL0152 (E-blocks2) in FlowCode 8. The macros of component Zigbee EB051 are not suitable.

Is it possible to release an update with this component?

Thanks in advance for your help.