Search found 9 matches
- Sat Aug 24, 2019 9:26 am
- Forum: Flowcode V8
- Topic: Interrupts
- Replies: 3
- Views: 2091
Re: Interrupts
Hi, ok great, delay in interrupt routine seems to do most of the trick, David from Matrix also suggested using a small cap on the input line, will add soon and recheck, much appreciated
- Thu Aug 22, 2019 11:02 am
- Forum: Flowcode V8
- Topic: Interrupts
- Replies: 3
- Views: 2091
Interrupts
Hi, using 18 series pic with rising edge interrupt configured on RB1 / INT1 pin. The simulation is perfect but testing on hardware the count is incremented both on the rising and falling edges, the pin is tied high with 10k and brought low with external reed switch, any suggestions welcomed. Thanks,...
- Mon Aug 19, 2019 10:02 am
- Forum: Flowcode V8
- Topic: Compiler / Linker / Programmer
- Replies: 1
- Views: 1308
Re: Compiler / Linker / Programmer
Hi, resolved, thanks you to David from Matrix, the linker should be:
"It looks like the linker is the problem.
It should be:
Location:
$(appdir)tools\DoNothing\DoNothing.exe
Parameters:
<<parameters box should be empty>>"
"It looks like the linker is the problem.
It should be:
Location:
$(appdir)tools\DoNothing\DoNothing.exe
Parameters:
<<parameters box should be empty>>"
- Sun Aug 18, 2019 3:39 pm
- Forum: Flowcode V8
- Topic: Compiler / Linker / Programmer
- Replies: 1
- Views: 1308
Compiler / Linker / Programmer
Hi, did a windows upgrade to win10 and running FC8. Using Pickit 2. Have gone through the documentation relevant to the programmer setup but am missing something and cant get it going. Could someone assist with the relevant and syntax for compiler / linker / programmer setting in FC8. Pickit 2.61 in...
- Sat Jul 20, 2019 9:56 am
- Forum: Flowcode V8
- Topic: Floating Point Math
- Replies: 2
- Views: 2004
Floating Point Math
Hi, trying to compare 2 floating point numbers to generate an on/off output byte = float_eq(float, float) Compares two floating point numbers to see if they are equal byte = float_ge(float, float) Compares two floating point numbers to see if they are greater then or equal byte = float_gt(float, flo...
- Mon Jun 17, 2019 10:54 am
- Forum: Flowcode V8
- Topic: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
- Replies: 21
- Views: 16502
Re: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
Hi Benj, ok 20Mhz external oscillator with PIC 18F4520 working 100%, many thanks
- Thu Jun 13, 2019 9:58 am
- Forum: Flowcode V8
- Topic: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
- Replies: 21
- Views: 16502
Re: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
Hi Benj, still no luck, moving to another PIC selection with faster 20MHz external xtal oscillator, will update soon, thanks
- Tue Jun 11, 2019 1:21 pm
- Forum: Flowcode V8
- Topic: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
- Replies: 21
- Views: 16502
Re: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
Hi, still no luck, crc error, are we missing something?
- Tue Jun 11, 2019 8:52 am
- Forum: Flowcode V8
- Topic: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
- Replies: 21
- Views: 16502
Re: DHT11 not measuring, SampleSensor stays '1' and show no reply on LCD
Hello Benj I am having trouble with the DHT11 and DHT22. I am also having trouble with the clock speeds. Ive read through all the forums and tried changing the clock speed. I am using a 16F887 PIC which has a internal 20 MHz oscillator/clock input. If I change the clock speed to 8MHz it give me a "C...