Matrix user forums

We have a client who requested that we use some Arduino Portenta machine control boards in his plant. I looked at the supported devices in Flowcode 9, but could not find any.
Can anyone tell me if there is any way to program the STM32H747XI in Flowcode 9?

Hallo, Thank you SO-SO much for all your help. It now works perfectly, you are a star!! For anyone having issues with the Pololu P-Star Bootloader in Flowcode, here is a short summary of what Benj told me to do to get it working: 1: Install P-Load bootloader in your Flowcode8/Tools folder and rename...

Hallo,

I have done as you told me and then tried it again, twice, and both times this message came up.

Hallo, I used the parameters you suggested: -t p-star -w "$(outdir)$(target).hex" In Flowcode it looks like its working fine, the LED's on the board flashed when it started the upload, but the program is not running on the board. I have tried and tested this program on both an Arduino Uno R3 and a E...

Now that is an embarrassing mistake!!! Sorry for that

I did what you said and it came back with 4 examples. Which one do I use and why?

Thank you for all your patience with me!!

Hallo Benj,

I changed the parameters to --Help and the attached message is what I got. Is this what you were looking for?

I tried the options you offered, settling for the second one that you said would be better if I removed the spaces and just use Boot. Now it tells me that the chip is "unknown". Any advice on that?

I need help to setup a third party bootloader in Flowcode 8 for the Pololu P-Star 45K50. First of all I downloaded the Pololu Bootloader Utility ( https://www.pololu.com/product/3156/resources ) and installed that in my Flowcode 8 Tools folder. Then I went into compiler options and in the Programmer...

Thank you guys so much for the help. Benj, thank you for pointing out my rooky mistake with the "no timer"! Now that I have that corrected the program runs perfectly on the Arduino. QMESAR, thank you for the advice about antiwind up and I will definitely do that if I do use the program in an actual ...

Please help me. I am new to Flowcode and I am having issues with my PID program that I want to use in an automated process. In Flowcode the simulation looks great and everything seems to be working. When I upload to the Adruino Uno R3 I do not get any PWM output. I tried finding the problem in my co...

Hallo Christina, Thank you so much for the great advice! I actually took it a step further: 1: Uninstall Flowcode 8 and all associated items (Pic8, Pic16, Pic32 and so on) 2: Deleted the entire registry entry "HKEY_CURRENT_USER \ Software \ MatrixTSL \ FlowcodeV8" as well as SCADA. 3: Then delete th...

I have been having the same issue with Flowcode 8.2 up to this morning. Now when I start Flowcode 8.2 is looks like it's starting, but then it crashes. I did the following with no success at all: 1: Uninstall Flowcode 8.2 completely and reinstall 2: Tried to start it in Safe mode, same problem there...