Good day all.
I have a project I created in version 5. Can the same V5 program be imported/opened in V8 then recompiled to run on an Arduino chip. If so what packages will I need to purchase and what are the issues if any?
Thanks in advance for your assistance.
Search found 325 matches
- Wed Jul 17, 2019 4:22 am
- Forum: General Programming
- Topic: Porting V5 PIC program over to Arduino V8
- Replies: 1
- Views: 2673
- Thu May 17, 2018 4:24 pm
- Forum: Flowcode V5
- Topic: Custom Baud rate assistance
- Replies: 4
- Views: 6083
Re: Custom Baud rate assistance
Good day all.
Hi Ben, any additional suggestions on this?
thanks in advance
Hi Ben, any additional suggestions on this?
thanks in advance
- Wed May 16, 2018 4:06 pm
- Forum: Flowcode V5
- Topic: Custom Baud rate assistance
- Replies: 4
- Views: 6083
Re: Custom Baud rate assistance
Hi Benj Thanks for the quick response. I made the changes but I just get garbled characters. I created an echo loop that takes/captures the received character and sends it back via second port. I also did this with the native usart values and it worked fine. If it makes a difference and if it helps ...
- Tue May 15, 2018 3:26 pm
- Forum: Flowcode V5
- Topic: Custom Baud rate assistance
- Replies: 4
- Views: 6083
Custom Baud rate assistance
Good day all. I am working with a esp8266 module. On start up is spits out data at a fixed baud rate of 74880. I want to be able to receive at the fixed rate than change over to 2400 bps. looking at the help file my options don't allow me to select outside of the options available. I thought to set ...
- Mon Apr 02, 2018 6:54 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks Medelec35.
I took some time to go over the wiring and discovered a trace from LCD power to Vdd.
Its not in the PCB design, so I did not suspect it as an issue. I will need to take this up
with the board fabricator.
Thanks for the assistance.
I took some time to go over the wiring and discovered a trace from LCD power to Vdd.
Its not in the PCB design, so I did not suspect it as an issue. I will need to take this up
with the board fabricator.
Thanks for the assistance.
- Mon Apr 02, 2018 3:10 am
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks looking into it.
Transistor DDTB142JC-7-F
Data sheet at https://www.diodes.com/assets/Datasheets/ds30403.pdf
Transistor DDTB142JC-7-F
Data sheet at https://www.diodes.com/assets/Datasheets/ds30403.pdf
- Sat Mar 31, 2018 5:41 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks medelec35.
yes to the question on output voltage VDD 3.36 o/p high 3.36v. In the data sheet you stated that it states a maximum output low voltage is 0.6v.
I don't know how to account for that in my circuit, short of using a pin that can output 0v. Any Ideas on this.
yes to the question on output voltage VDD 3.36 o/p high 3.36v. In the data sheet you stated that it states a maximum output low voltage is 0.6v.
I don't know how to account for that in my circuit, short of using a pin that can output 0v. Any Ideas on this.
- Fri Mar 30, 2018 5:24 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
18lf46K80 Vref+/ RA3/ set as I/O not going does not go to 0v outputing a 0 in flowcode goes to .16v. Anyone got any Ideas whats not happening here.
Thanks in advance
Thanks in advance
- Tue Sep 23, 2014 2:00 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Thanks Ben I got it working. With your confirmation I was forced to look somewhere else. I unchecked the "use PPP to configure the chip" and instead used the CCSLoader ICD-U64 programmer application to configure it, and it worked. I did not think to do this seeing that I have had no problems loading...
- Tue Sep 23, 2014 12:13 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Good day Ben. Any more on this?
- Mon Sep 22, 2014 12:56 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
"Enabled in hardware"
I tried it again and still no reset.
The Program just hangs in the while loop.
Ondra
I tried it again and still no reset.
The Program just hangs in the while loop.
Ondra
- Mon Sep 22, 2014 11:54 am
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Good day all. I just got a replay from support at microchip.
I sent them a copy of my sample code. The recommendations
they made. I already have setup in PPP. I'm really thinking that
this is a flowcode bug / issue. Can someone please help
with this? Thanks in advance.
Ondra
I sent them a copy of my sample code. The recommendations
they made. I already have setup in PPP. I'm really thinking that
this is a flowcode bug / issue. Can someone please help
with this? Thanks in advance.
Ondra
- Fri Sep 19, 2014 6:21 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Good day all. It's been a while since I tackled this issue. I am uploading this code sample in hopes that someone can figure out why this does not work. I have tried many different combinations but nothing seems to work. I'm starting to think this is a Flowcode issue. Thanks in advance for your help.
- Thu Jun 12, 2014 4:35 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Thanks Kersing. I don't have a test program. I am trying to implement this on production code. From the data sheet. I get that the WDT is independent to any code I write; except when I stop or start the WD timer and that's if I select to software control the timer. Aside from that I understand that ...
- Wed Jun 11, 2014 12:13 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Thanks Ben.
I did that. Than set the postscaler to 1:4096 which according to the data sheet should work out to about 16 seconds.
I let the device run as per-normal and nothing happens. Shouldn't the device reboot after the WDT times out?
I did that. Than set the postscaler to 1:4096 which according to the data sheet should work out to about 16 seconds.
I let the device run as per-normal and nothing happens. Shouldn't the device reboot after the WDT times out?
- Wed Jun 11, 2014 10:53 am
- Forum: Matrix Online Courses
- Topic: WDT tutorial
- Replies: 1
- Views: 17149
WDT tutorial
Good day. I am having some issues using the watchdog time for the 18lf46k80. Do you have any WDT tutorials,
or tutorials that implement the use of the watchdog timer?
or tutorials that implement the use of the watchdog timer?
- Wed Jun 11, 2014 10:46 am
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
Re: WDT not working. Won't reboot software
Hello is anybody out there?
Is this a bug in version 5 that works in version 6?
Is this a bug in version 5 that works in version 6?
- Tue Jun 10, 2014 12:29 pm
- Forum: Flowcode V5
- Topic: WDT not working. Won't reboot software
- Replies: 14
- Views: 10641
WDT not working. Won't reboot software
Good day all.
I am trying to use the WDT in a project I'm working on. For some reason I can't get it to work.
Here are the details if any one can help I would much appreciate it thanks in advance.
18LF46k80
19660800
I am trying to use the WDT in a project I'm working on. For some reason I can't get it to work.
Here are the details if any one can help I would much appreciate it thanks in advance.
18LF46k80
19660800
- Mon May 19, 2014 4:21 pm
- Forum: Flowcode V5
- Topic: interface to 4ma to 20 ma current loop
- Replies: 6
- Views: 7526
interface to 4ma to 20 ma current loop
Good day all. Can someone direct me to a good resource for interfacing and programming to/for a "4ma to 20 ma current loop" using flowcode as the programming language if possible.
Thanks in advance.
Thanks in advance.
- Fri Sep 06, 2013 6:40 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks again Kenrix2.
My project uses a 18LF46K80 fully maxed. I checked the
data sheet and it does not support connecting to LCD Glass.
I'll put this as and upgrade to consider in a future build of the
device. Thanks for the in-site.
Ondra
My project uses a 18LF46K80 fully maxed. I checked the
data sheet and it does not support connecting to LCD Glass.
I'll put this as and upgrade to consider in a future build of the
device. Thanks for the in-site.
Ondra
- Thu Sep 05, 2013 12:06 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks Kenrix2.
I'll look in to this. A few questions.
How do you communicate to the class?
Can you use a flowcode object, or do
I have to create the function to print
data to the screen?
Ondra
I'll look in to this. A few questions.
How do you communicate to the class?
Can you use a flowcode object, or do
I have to create the function to print
data to the screen?
Ondra
- Wed Sep 04, 2013 5:08 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks a whole lot Sir. I'll give it a go.
Ondra
Ondra
- Wed Sep 04, 2013 4:51 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks. So than to make this simple, I can, ignoring the LCD macros create a macro that when called does the following in that case: Data 1(D1) = 1 Data 2 (E1) = 1 Data 3 (D0)= 1 Data 4 (E0)= 1 RS (D5) = 1 ????? What about this Enable (E2) =1 ????? and this Mosfet Switch (A3) = 0 Does the order of s...
- Wed Sep 04, 2013 4:15 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
Re: How to toggle power to an LCD Screen?
Thanks Ben.
I was thinking that that would have the same effect sourcing VDD through the control or data pins?
Ondra
I was thinking that that would have the same effect sourcing VDD through the control or data pins?
Ondra
- Wed Sep 04, 2013 3:48 pm
- Forum: Flowcode V5
- Topic: How to toggle power to an LCD Screen?
- Replies: 17
- Views: 12196
How to toggle power to an LCD Screen?
Good day all. I have an LCD screen connected to my system. To conserve battery power I want to power down the LCD. I tried using a N-channel Mosfet connected to the Ground of the LCD. When the Mosfet is triggered(Power is disconnected), the LCD screen still works. Seeing this; I disconnected the Gro...