Search found 311 matches
- Wed Jan 05, 2022 11:46 pm
- Forum: General Programming
- Topic: How to do Pwm off and on in flowcode??
- Replies: 9
- Views: 7470
Re: How to do Pwm off and on in flowcode??
Hello, Martin I know it has nothing with the question; I have been in the Matrix forum (Flowcode 3) since 2008, I was taking a look at the topics, I see that Martin (Medelec) is now part of the Matrix Staff, I CONGRATULATE You !!! You are one of the people who is contributing with your knowledge to ...
- Fri Sep 17, 2021 4:28 pm
- Forum: Flowcode V7
- Topic: Candy Machine
- Replies: 7
- Views: 5376
Re: Candy Machine
I tried with a level switch, but I have the idea of making a few devices and I was looking for a way to simplify the manufacturing and speed up the assembly, trying to correct the fault with software. . .but I think it would be the safest option.
- Fri Sep 17, 2021 3:41 pm
- Forum: Flowcode V7
- Topic: Candy Machine
- Replies: 7
- Views: 5376
Re: Candy Machine
This is the flowchart I was using. . . .then add the option SETPOSITION (0, 0) in the sequence of the program when it is waiting for the coin to be deposited to make sure the door does not stay open, that's where the vibration started.
- Fri Sep 17, 2021 3:25 pm
- Forum: Flowcode V7
- Topic: Candy Machine
- Replies: 7
- Views: 5376
Re: Candy Machine
Hi Benj, I know it sounds very sweet :D I use SETPOSITION (0, 0) and then DISABLE SERVO, but sometimes the door opens a little and I wanted that without using a level switch, through programming the door would be kept closed safely. Is there a way to use the function (IF) using some variable (X) to ...
- Thu Sep 16, 2021 6:37 pm
- Forum: Flowcode V7
- Topic: Candy Machine
- Replies: 7
- Views: 5376
Candy Machine
Hello everyone, A question about servos; I am using a servo to open and close a door which releases candy; It works by inserting a coin, activates the servo and opens the door to release a certain amount of candys. The problem I had was that sometimes the door stayed a little open and the candys cam...
- Thu Dec 24, 2020 7:11 pm
- Forum: Flowcode V8
- Topic: Merry Christmas!
- Replies: 11
- Views: 8207
Re: Merry Christmas!
Merry Christmas !!!
- Thu Nov 26, 2020 5:17 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hi,
Thanks a lot, now I understand the sleep mode better, you clarified my doubts, I will do more tests, the PIC12F1840 contains the features you mention.
Best Regards !!!
Thanks a lot, now I understand the sleep mode better, you clarified my doubts, I will do more tests, the PIC12F1840 contains the features you mention.
Best Regards !!!
- Fri Nov 20, 2020 3:55 am
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hi,
Yes, the idea is to put the chip to sleep, the WDT will activate the device after the preset time and continue the operation, erasing continuously in each period of time.
Best Regards !!!
Yes, the idea is to put the chip to sleep, the WDT will activate the device after the preset time and continue the operation, erasing continuously in each period of time.
Best Regards !!!
- Mon Nov 16, 2020 6:14 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hi, Thank you very much for your help, use the pic12F1840 just need to configure the programming options window, select the automatic Watchdog mode and enable the Watchdog; With these options selected, I choose the time in which the Watchdog enters; performs the complete program sequence and the PIC...
- Thu Sep 24, 2020 9:38 pm
- Forum: Flowcode V7
- Topic: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
- Replies: 6
- Views: 5822
Re: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
Thanks Benj.
- Thu Sep 24, 2020 8:53 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hi, I still can't handle SLEEP () mode I'm still trying to work with SLEEP () mode; and if it goes into sleep mode, but I can't wake up, with INT or IOC interrupts; When I add 10 mS to it in the MACRO interrupt it shows me error when compiling and when I use to WDT : WDT MX_CLEAR_WATCHDOG; WDTCONbit...
- Mon Sep 21, 2020 4:30 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hi Stefan,
I appreciate the help, I will eliminating the delay, to see if I can sleep and wake up the PIC correctly without interrupting the correct sequence in the programming.
Thank you very much
Enrique
I appreciate the help, I will eliminating the delay, to see if I can sleep and wake up the PIC correctly without interrupting the correct sequence in the programming.
Thank you very much
Enrique
- Sun Sep 20, 2020 6:59 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Re: Help with SLEEP and WAKE UP PIC16F648A
Hello I have done many different tests, I used the PIC16F1847, I was able to enter the SLEEP mode and later to WAKE UP, but when the PIC wakes up, it just starts the program sequence, it interrupts and starts from the beginning, it does not finish the sequence started; for example, in the published ...
- Sat Sep 19, 2020 1:28 am
- Forum: Flowcode V7
- Topic: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
- Replies: 6
- Views: 5822
Re: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
Thanks for your help
Enrique
Enrique
- Fri Sep 18, 2020 9:18 pm
- Forum: Flowcode V7
- Topic: Help with SLEEP and WAKE UP PIC16F648A
- Replies: 10
- Views: 8017
Help with SLEEP and WAKE UP PIC16F648A
Hello please can someone help me, I'm trying to make a small circuit that uses 3 AA batteries and I need to send the pic to SLEEP mode, when checking the current consumption in the PIC I realize that the current drops considerably, but I can't get the switch to do the process programmed, the program...
- Tue Sep 15, 2020 5:06 pm
- Forum: Flowcode V7
- Topic: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
- Replies: 6
- Views: 5822
Re: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
Hello Benj,
Ok, so they are 2 identical sensors with the same address connected to a PIC; I found a PIC16F1847 has two I2C_master ports (CHANNEL 1 B1 B4 and CHANNEL 2 B2 B5) and the LCDI2C display connected to I2C SOFTWARE A1 A2.
Theoretically possible to do this?
Thank You Benj
Ok, so they are 2 identical sensors with the same address connected to a PIC; I found a PIC16F1847 has two I2C_master ports (CHANNEL 1 B1 B4 and CHANNEL 2 B2 B5) and the LCDI2C display connected to I2C SOFTWARE A1 A2.
Theoretically possible to do this?
Thank You Benj
- Mon Sep 14, 2020 8:32 pm
- Forum: Flowcode V7
- Topic: CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
- Replies: 6
- Views: 5822
CONNECT 2 SENSOR I2C_MASTER AT THE SAME PIC
Hello I want to connect two equal sensors with I2C_MASTER communication in the same PIC to be read by the same Display; I found the PIC18F26J11. . . I see that this PIC has 2 communication ports I2C_MASTER (CHANEL1 AND SOFTWARE). Can someone please guide me if it is possible to connect those 2 senso...
- Wed Jul 08, 2020 4:16 pm
- Forum: Flowcode V7
- Topic: Help with Variable comparison
- Replies: 7
- Views: 5811
Re: Help with Variable comparison
Hello Martin,
Excellent !!! It works, the program is simple, I would never have done it using that method. . .
Thank You !!!
Enrique
Excellent !!! It works, the program is simple, I would never have done it using that method. . .
Thank You !!!
Enrique
- Wed Jul 08, 2020 5:20 am
- Forum: Flowcode V7
- Topic: Help with Variable comparison
- Replies: 7
- Views: 5811
Re: Help with Variable comparison
I am closer
- Wed Jul 08, 2020 5:19 am
- Forum: Flowcode V7
- Topic: Help with Variable comparison
- Replies: 7
- Views: 5811
Re: Help with Variable comparison
I am closer
- Wed Jul 08, 2020 3:07 am
- Forum: Flowcode V7
- Topic: Help with Variable comparison
- Replies: 7
- Views: 5811
Re: Help with Variable comparison
Hi Martin,
This flowchart is what I think could be excluding variables until reaching the highest value, but I think it would be a huge program.
Enrique
This flowchart is what I think could be excluding variables until reaching the highest value, but I think it would be a huge program.
Enrique
- Tue Jul 07, 2020 11:13 pm
- Forum: Flowcode V7
- Topic: Help with Variable comparison
- Replies: 7
- Views: 5811
Help with Variable comparison
Hello, I thought it was an easy comparison, but comparing each variable with the others has been difficult and I got lost; I am trying to compare variables and know which is the one with the highest value; for example X1 = 25, X2 = 31, X3 = 45, X4 = 39, X5 = 40, X6 = 37, X7 = 29; how to find the cor...
- Fri Nov 29, 2019 12:53 am
- Forum: Flowcode V8
- Topic: V8 Worth the Upgrade?
- Replies: 5
- Views: 3924
Re: V8 Worth the Upgrade?
Hello, My personal opinion ( Leaning on the forum since Jan 12, 2008 ) I also use Flowcode from version 3 until now and Benj, Martin (Medelec), Leigh, David, Qmesar, Enamul and many more electronic colleagues, with whom we have supported, even some do not work in Matrix and any way they have given u...
- Mon Jun 10, 2019 4:34 pm
- Forum: Flowcode V6
- Topic: SIM800L
- Replies: 13
- Views: 12936
Re: SIM800L
Hello Jan, I do not know what failure 255 (NO REPLY); in my projects with the GSM module it generates code 0 (ok), from the first second that I connect to the GSM power supply, it generates OK, even when I'm still the signal is not linked to the GSM, the LED flashes quickly and then slowly and in bo...
- Sat Jun 08, 2019 5:11 pm
- Forum: Flowcode V6
- Topic: SIM800L
- Replies: 13
- Views: 12936
Re: SIM800L
Hello Jan, the led of the sim800l module flashes continuously fast when no signal is detected, when the module detects signal and the communication is linked to the sim, the led flashes slowly between 2 to 3 seconds between a flashing and another. You can exchange the sim of other companies and do n...