Matrix user forums

I Still don't know what port of the PIC is UDP Channels 0,1,2,3 a part of. What Port A,B,C,D? of the PIC does the data flow out of and into?

Ondra

Yes I am using the HS mode. Is this correct.
Yes

Hi Benj.
Question. The port number is the port of the receiving computer right?
e.g., 80 for Http or 21 FTP. What I want to know is when you say channel what channel and or port on the PIC am I communicating out of. I assume channel is one of the 8 pins on a particular port?

Ondra Simons

Good day again. Got another question. I have a board running a PIC 18F258 with an 18.432MHz crystal. In TMRO properties when I select to use the transition on T0CKI pin my program does not run. When I select Internal clock(CLKO) the program runs fast, does not keep time. I The program is very simple...

Good day All.
I have a PIC board that has a real time clock my question is in flowcode programming how do you use or address a real time clock?

Ondra Simons

When I select Chip->configure I get this message"Can't load znport.sys"
what wrong it just started happening. program downloading
but not running run in sim though.

what port does the IP component communicate over and can it be changed and if so how?

Ondra

Ok. how about this when sending and receiving using a UDP or IP is the information packaged using the Ethernet packets or is this the case when sending through channel 0 only.

Ondra

Hi Benj. Thanks for your response. I know that flowcode supports UDP over ethernet. What I want to do is connect and communicate over a dial up modem. Any thoughts on that.

Ondra

Good day all.
I need some help or at least a point in the right direction. I would like to know if it is possible to Use UDP over a Serial or Modem connection. And if so, could you give an example of how this would be done.

Ondra

Good day All.
I would like to know if anyone has any experience using flowcode for developing dial up application/s using SLIP or PPP(Point to Point Protocol). I,m developing an application that will requirer a PPP or SLIP implementation
and could use some help.

Ondra Simons

Good day all.
I would like to know if any one knows how I might go about Synchronizing and a pick clock with the time on a PC over the Internet. I created a 24hr time clock that I want to update each time it dial in. Thanks in advance

Ondra

I've created a time clock in Flowcode. What I want to do is send it out the RS232 port and see the time changing in hyper terminal. When I try to just send the string out what I get is the numbers appending as it changes. Is there a way to force the cursor back to the beginning before the numbers ar...

Good day all. It seems I'm spending so much time on this computer days just blend into each other. Anyway here's my question. Do PICs have a built in ID Number. I want to create a network of PIC's each with it's own ID. Does anyone know what is the best way to go about this?.

Ondra

Yes Thanks that does clear it up. While I'm at it, how do you delete a component I tried to delete the RS232 component and I couldn't.

Thanks again for your help

Thanks for your help Steve. Are you saying that at this point I need to dabble in C coding. If so I really don't know where to start. Is there a way to do all I need using flowcode objects? beside the c object that is.

Ondra

Good day all. I need some help with the RS232 Component. Couple of things. 1. When I check the radio button to select byte for my transmit or receive in the RS232 Component, then I select "call component macro" I still only see SendRS232Char and RecRS232Char. When I select byte should I then see Sen...

I would like to know if there are any Flowcode tutorials on using
PWM, hopefully with some hardware examples also.


Ondra

Hi All. I would like to know how, if it's posible to make a 24 hr clock using flowcode only. I have a slight understanding when reading C but can't as yet write in C.

Ondra

Thanks Steve. I read through it, would like to get some flowcode examples, I"ll try working through it and see how I make out.

Ondra

Thanks Steve i found a lot on the forum. It was a big help, I go it working.
Thanks again

Good day.
lam looking for some examples using the RS232 component.
does anyone have or know where I might find some.
Thanks in advance.

Ondra Simons

Good day to everyone. I would like to know if anyone has any experience and can give me an example of using flowcode to capture and store the distance readings from a Polaroid 6500 Ranging Module. Or any distance ranging unit. Thanks in advance.

Ondra

Thanks benj. Yes I would like the UDP examples. That would help with the second part of what I want to do. Back to my original request. I think I might have not stated my goal correctly. What I am trying to do is get the information from the pic to my page located on a remote site. The page is alrea...

Can anyone help me. I am working on a project using the TCP/IP component. I have coded a web page with a list of variables I need updating. The way the page is setup when ever I want to up date the variables I would type as an example: - www.http://mywebsitename.com/reading1=newreading,reading2=newr...