Matrix user forums

Hi LeighM
I really tried the whole weekend but without luck;-)
Really tried a lot and got stuck....

HI everyone Can Arduino Mega 2560 R3 use Clock RTC MCP794N ? Original : Clock RTC MCP794N with dsPIC: MIAC_dsPIC_ClockDemo.fcfx Want to use Clock RTC MCP794N with Arduino Mega 2560 R3, can this work? Attached work file : SolarTrackerMega2560-R3 Test UR og Clock.fcfx Do you have a suggestion for cod...

HI Benj
Thank you very much for the proposal.
I will try with 1 piece first;-)


Thank you very much.
It works fine;-)

HI Benj
Thank you for your information.
Found a problem Screw Terminal EB-002-000-1 does not work with LCD I2C!. Due to resistance in Screw Terminal! EB-002
Can I remove resistors in Screw Terminal EB-002 ?

Hi Jorgen Without inserting E-block Arduino Shield EB092 and only with Mega 2560 R3 connect to Port D0 = (SCL) - D1 = (SDA) Then Display works fine. But by inserting Mega 2560 R3 (connect to Port D0 = (SCL) and D1 = (SDA) ) to E-block Arduino Shield EB092 Then Display does not work. Is there anyone...

Hi every one
I can't make the LCD I2C work!
Would you like to help with a solution;-)
User Mega E-block Arduino Shield EB092-000-1
Like a code example Display Mega 2560 R3 connect to Port D0 = (SCL) - D1 = (SDA)

Attached file:

Hi Leigh
Yes it is as you type the HDMI output to screen
Thank you very much for your example;-)
I will immediately test your example and then print the proposal and save the suggestion as I always do.

GO'Working Day

Hi Benj
Thank you very much for the answer;-)

How to insert another background picture in RPI3 board?
Please a example step by step!

HI Martin
Thanks for your reply...

Please see the web link below!
There you will be able to see the topic (Minutes% 5) = 0 described a LeighM
search.php?st=0&sk=t&sd=d&sr=posts&keyw ... t&start=50

Hi Team!

I just get a RPI3 board. Is there a guide how to use RPI with FC8. I remember I have seen (but don´t remember where) somewhere that I need to install some file/driver, maybe an examble. Please.

Hope you can help.

Hi everyone

Is it possible to convert Minutes to Byte file called Track_Period from Clock Coderne attached below! This will make the whole processes simpler. And don't use anything interrupts.
So that Track_Period = (convert Minutes to Byte).
Attached files:

Hi Martin Questions regarding the below illustrated! In Display, the following step shows: 1 : 0 ON After some drawings, the display shows, for example, 90 : 0 ON How can we know at each startup of Tracking reset Minutes and Seconds in Dispaly ?? Do you have a suggestion ? Have tried a lot but unsu...

Hi Martin How are you powering it? User Motor component DC Motor (Full Bridge) Can you run it from code normally? Yes Is there some initialisation needed? Component DC Motor (Full Bridge) Is it wired correctly? Yes Here you can see where I turn on Tracking and turn off after 1 minute And I can use ...

Hi Martin Then I have a test in the practice world. And the display shows start and stop. And this looks right. But have tried to set the component Motor Reversible so this starts every 5 minutes and runs max 1 minute But in simulation and in practice the Motor does not run. Interrup Tracking Motor...

Hi Martin

Thank you very much for your proposal for Tracking
I work well with your proposal and will tell you how it works in practice.

GO´ weekend
Monie

Hi Martin
I've tried out some of your suggestions.
But it does not seem to grout properly.
I'm just as stuck.
So a code example in the attach file will greatly benefit me;-)

GO' Working Day

Monie

Hi Martin
Many thanks for your suggestions;-)
Have tried many of your suggestions but unsuccessfully.
Can't Get the Tracker Function to Work!
Would you like to help insert your suggestions into the Tracker operation.
Attached file:

Hello everyone

I wish (CODE) to start Tracker every 5 minutes and finish (STOP) after 1 minute.
Would you like to help with a proposal;-)

Yours sincerely
Monie

Hello everyone Does anyone here help with getting SolarTracker to track every 5 minutes? Have tried very much but without success ;-) Hope much you will come up with a proposal and like where it goes wrong! Interrup Tracking.JPG Tracking.JPG Attached file: MIAC dsPICSetting SolarTracker_10-07-2019....

Hi LeighM
With your help, I got the variable to count the pulses now!

Many thanks for your help

Hi LeighM
I can't make the counter work.
Is it something you want to help with?
Can see the pulses on InputDIGITAL!
But no pulses printed on display...
What makes the file PulseIn Previous? Attached file:

Hi LeighM
Sorry for first responding now
Have been to Germany to see the Bremerhaven cruise ship.

Will test your code suggestions

Many thanks for the proposal

Hi every one
Regarding: MIAC dsPIC Read for PulseIn
Cannot count PulsIn up to eg 100
Only count the PulseIn up to 2
Do you have a suggestion on how to read PulsIn up to eg 100 ???

Attached file:

Hi LeighM
All time suggestions now work Time and Date as I wanted
Thanks for your patience

Hi LeighM

Can you see where in Micro "Date" can view 2010 and not just 19
Have tried a lot but without luck