Matrix user forums

Same pin problem. Im' going to stop here. Something is wrong. I'll let you dig into it..

Chad

The dmx component is also broken. There appears to be something wrong with setting pins on the pic 32.. Target folder: C:\Users\ralph\DOCUME~1\PICFLO~1 Source name: C:\Users\ralph\Documents\Pic flow projects\PicMZ test 1.fcfx Title: Description: Device: PIC32.32MZ.32MZ0512EFE064 Generated by: Flowco...

My I2c baud is 1/2 of what i set it to in the component. This might be my fault with a some clock config but you might want to check because other timing stuff seems to work.?

CHad

I tried to add a IPWM component and I can't asign a pin to it. It also won't compile. Target folder: C:\Users\ralph\DOCUME~1\PICFLO~1 Source name: C:\Users\ralph\Documents\Pic flow projects\PicMZ test 1.fcfx Title: Description: Device: PIC32.32MZ.32MZ0512EFE064 Generated by: Flowcode v8.2.1.13 Date:...

Thanks, guys great information! Stefan, I Knew it had an internal oscillator, I didn't know it was 24mhz. I was always under the impression that internal oscillators weren't very accurate. If it is good enough for usb's and and serials then that would be great! One less thing to put on the board! I ...

Hi Stefan, I am using the PIC32MZ0512EFE064 (200Mhz). I used a tqfp breakout board board and soldered it up, so I don't have a real demo board. It is kind of working, but I am new to the chip and programmer and config bits so I am going through all of the learning curve. I have a PK4, and I am using...

Hi Guys, Ok so after fighting with the pk4 it sometimes shows up in IPE and I can see the chip on my protoboard. Ok so it seems to be programing ok now. Also I have a 12mhz oscillator How should I be setting the clock stuff?? Sorry new chip, still learning.. Does any one have a blank program for the...

I agree that looks great. There are several things I want to try with the pic 32.
Looks like I need to get the dsp pac..

Chad

One more question... Do any of these have any program writable registers or do I have to add some external flash i2c/spi to store changeable variables?
I am still going over the datasheets but the answer hasn't jumped out at me yet... (eeprom)

thanks,
Chad

It's nice that they dump it all right there.. I am also looking at the smaller PIC32MX174F256B for little things. I am glad to hear that they work well with flowcode.. What oscillator frequencies are people using?

Chad

That's great guys, Keep it coming! It's been a decade since I have touched a pic.

Chad

Hi Ben,

Thanks for the info. I ordered the PiCkit 4 and will get some chips to play with...

chad

I am looking at Pic 32MZ0512EFE064. Does any one have any experience with this family and flowcode?
Matrix says it's supported. Do the peripherals and dsp stuff work?

Chad

Hi all. I have a project that I want to work on and I had been using the St arms.. FLowcode has some shortcomings with the ST chips so I wanted to see what Pic's you all are working with. What 24 / 32 bit pics are you guys using? What do you use to program them pickit3? or something else.. Any other...

I found This guy on youtube that has some good videos explaining some stm32 features. I learned a lot from them thought others might as well..

https://www.youtube.com/channel/UCpyumz ... qhc5BC9sCg

chad

Hi ben,

Sorry I have been busy with work.. I'll give this a shot this weekend and let you know!

Thanks

chad

Yeah I had 4.7k pullups. I also had a dud jumper wire... I don't want to talk about it... Anyway I spent many hours testing it this evening. Here's a rundown. Initialize works. Dac channels work. Enable channels work. 100kb,400kb works. 1meg is no different in speed to 400k. Have not verified actual...

I Tried it out. I am not getting anything on the sda or scl pins.

Edit I had the pin wrong Scl is pb8 I get a blip on the scope but it isn't changing the dac output.
I'll dig into it later
thanks


C

Cool, I try it out. Thanks!

I'll give it a try when I get home later..

Chad

And btw, I can't select hardware at all. It only has the software option.

and it didn't work...
I am using the 446re chip target.
chad

Yeah, something is funky, because I can't choose the pins that I want to use. I can select sda c9 and scl c8, but can't select them in the pins.

Chad

Ok I will!

I'll give it a shot. I did have one question. In the properties you have sda and sda pins, scl, scl pins.

I don't get why there are 4 pin settings for those two pins.

Chad

Glad It isn't just me! Ok, i'll wait for ben to debug this...
Thanks,
Chad

I haven't used a lookup table before, but sure. I think I am going to have to ultimately store like 20 variables.
Chad

I'm making it up as I go..

The guys are fixing stuff on the arms. They are getting better and better...

chad