Hi Flowcode team,
Is the yellow LED LED1 on the E006 ment to mean anything now i have had a HP488 board and the yellow programing LED flashed when programing has this changed on this board it works ok.
But if one day i have programing problems how do i know that the pic is getting programmed?
Wayne
EB006
-
- Posts: 234
- Joined: Thu May 31, 2007 2:18 pm
- Has thanked: 7 times
- Been thanked: 12 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB006
Hi Wayne
There are two LEDs on the EB006, one indicated the board has power, the other indicates that the programming IC is powered up and ready. When this second LED is flashing it indicates that the is USB commuications going on between the PC and the IC on the EB006. There is really no more to it then this.
PPP automatically verifies your code is on the device after programming so if you were to start getting programming issues you should be warned then and there.
There are two LEDs on the EB006, one indicated the board has power, the other indicates that the programming IC is powered up and ready. When this second LED is flashing it indicates that the is USB commuications going on between the PC and the IC on the EB006. There is really no more to it then this.
PPP automatically verifies your code is on the device after programming so if you were to start getting programming issues you should be warned then and there.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel