Hi,
I'm starting to learn the programming of the PIC using the HP-488 development board.
When I try to look at the content of the HEX-file in the PPP-programmer, it asks for the unlock code.
Where can I obtain such a code?
Thank you.
PPP Unlock code
-
Tondeleir Rudy
- Posts: 1
- Joined: Wed Jan 29, 2014 9:28 pm
- Contact:
-
DavidA
- Matrix Staff
- Posts: 1076
- Joined: Fri Apr 23, 2010 2:18 pm
- Location: Matrix Multimedia Ltd
- Has thanked: 58 times
- Been thanked: 258 times
- Contact:
Re: PPP Unlock code
Hello,
That sounds like a very old version of PPP, i would get a more modern version which does not ask for this unlock code.
http://www.matrixmultimedia.com/lc_inde ... rder=&dir= - (v13 with standalone installer)
Or download the latest Flowcode and the latest version of PPP(v17) is available in the Tools folder there.
That sounds like a very old version of PPP, i would get a more modern version which does not ask for this unlock code.
http://www.matrixmultimedia.com/lc_inde ... rder=&dir= - (v13 with standalone installer)
Or download the latest Flowcode and the latest version of PPP(v17) is available in the Tools folder there.