EB 006 Version 9

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
Beertree
Posts: 24
Joined: Wed Apr 29, 2015 4:49 pm
Has thanked: 5 times
Been thanked: 5 times
Contact:

EB 006 Version 9

Post by Beertree »

Hi at all, I just started with Flowcode 6 and the Multiprogrammer EB-006-00-9, supplied by usb. Power LED is on. when I try to Programm the device, i get the following Error.
What is wrong? Using the external supply makes no difference.
Attachments
ttt.png
(137.74 KiB) Downloaded 6481 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: EB 006 Version 9

Post by Benj »

Hello,

Please can you confirm that all the following jumpers are connected horizontally and also let us know what positions they are in?

J15 Target Voltage
J11 Voltage Source
J12-J14 Prog Source

I would recommend these settings for USB based power.

J15 - 5V
J11 - USB
J12-J14 - USB

Beertree
Posts: 24
Joined: Wed Apr 29, 2015 4:49 pm
Has thanked: 5 times
Been thanked: 5 times
Contact:

Re: EB 006 Version 9

Post by Beertree »

Hi,
Thank you for the fast response. Using USB-Power does not work either. I now solved the problem myself. When I feed in 5V directly (after the regulator) everything works fine. The board is simply not ok.

john_m0ers
Posts: 29
Joined: Wed May 07, 2008 3:41 pm
Location: lincoln
Been thanked: 3 times
Contact:

Re: EB 006 Version 9

Post by john_m0ers »

Hi,
out of curiosity, what voltage were you using to start with?
thanks
john

Beertree
Posts: 24
Joined: Wed Apr 29, 2015 4:49 pm
Has thanked: 5 times
Been thanked: 5 times
Contact:

Re: EB 006 Version 9

Post by Beertree »

A bit late, but 5v targetvol. and the walladapter set ro 9v.

Post Reply