Signed USB Drivers

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

User avatar
Benj
Matrix Staff
Posts: 13980
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4244 times
Been thanked: 4006 times
Contact:

Signed USB Drivers

Postby Benj » Mon Jun 01, 2015 4:50 pm

Hello All,

I have re-done all of our hardware USB drivers with signed versions that should now be happy to work alongside Windows 8 and hopefully 10 also without having to boot Windows into a none standard mode of operation.

Windows 7 should also work but Vista/XP may have issues.

If anyone has a go with any of these then please let me know how you get on. We have done some testing in house and I think everything should be ok but wanted to try them before we switch the drivers from our main products pages. Also note that the .inf file right click install method should also now work for everything.

EB006.zip
(1.21 MiB) Downloaded 1026 times

EB006v9.zip
(4.81 MiB) Downloaded 824 times

EB064.zip
(1.22 MiB) Downloaded 697 times

ECIO28.zip
(1.14 MiB) Downloaded 785 times

ECIO40.zip
(1.14 MiB) Downloaded 880 times

FlowKit.zip
(1.16 MiB) Downloaded 743 times

FormulaFlowcode.zip
(1.36 MiB) Downloaded 785 times

MIAC.zip
(1.16 MiB) Downloaded 710 times

MIACUSBSlave.zip
(1.14 MiB) Downloaded 700 times

USBSerial.zip
(5.24 KiB) Downloaded 859 times

USBSlave.zip
(1.14 MiB) Downloaded 758 times


If anyone wants to know how to do this, e.g. for a Flowcode USB component then I can help show you how, certificates cost around £150 a year and you only need it to be valid for when you do the actual signing.
These users thanked the author Benj for the post (total 5):
JohnCrow (Mon Jun 01, 2015 6:16 pm) • medelec35 (Mon Jun 01, 2015 8:08 pm) • petesmart (Tue Jun 02, 2015 10:45 am) • kersing (Tue Jun 02, 2015 9:37 pm) • Brendan (Mon Jun 22, 2015 5:22 pm)
Rating: 29.41%
 

User avatar
JohnCrow
Valued Contributor
Valued Contributor
Posts: 1367
Joined: Wed Sep 19, 2007 1:21 pm
Location: Lincolnshire
Has thanked: 381 times
Been thanked: 713 times
Contact:

Re: Signed USB Drivers

Postby JohnCrow » Fri Aug 14, 2015 2:51 pm

Hi Ben

I've just done a clean install of windows 10 x64-pro.

Flowcode 6 pro and all 4 versions of Flowcode 5 installed and activate ok. (Flowcode 6.1.2.0)

Hardware. Most of the new signed drivers installed ok. (Not tried the USB serial & slave yet)

Just 2 problems

16Bit ECIO
When trying to program gives the following error

Excepted device attached
CMDline switches = -eciodsp16
Dev attached = ECIO -40 40pin module
This is both on usb power and from the PSU in the base board


AVR ISP mk2 Programmer
Driver wont install
Gives an error Atmel LIBUSB(0)

Any ideas
Thanks
These users thanked the author JohnCrow for the post (total 3):
medelec35 (Sun Aug 16, 2015 9:11 pm) • petesmart (Sun Aug 16, 2015 11:14 pm) • Benj (Tue Sep 01, 2015 10:34 am)
Rating: 17.65%
 
1 in 10 people understand binary, the other one doesn't !

EtsDriver
Valued Contributor
Valued Contributor
Posts: 405
Joined: Tue Apr 15, 2014 4:19 pm
Location: Kajaani, Finland
Has thanked: 327 times
Been thanked: 210 times
Contact:

Re: Signed USB Drivers

Postby EtsDriver » Sun Sep 20, 2015 3:22 pm

Here are my results of these drivers on Windows 10 x64:

eb006 - OK Works, tested ICD
eb006v9 - OK Works, tested full GHOST
FlowKit - OK Works, tested ICD functions on atmel board.
MIAC - OK Programming works, reading works on MIACprog.

***
EDIT:

Is there going to be digitally signed avrISPmkII driver? Having trouble installing the unsigned driver, even tough using unsigned drivers enabled mode on Win10... :S
These users thanked the author EtsDriver for the post (total 4):
medelec35 (Sun Aug 16, 2015 9:11 pm) • petesmart (Sun Aug 16, 2015 11:14 pm) • JohnCrow (Mon Aug 17, 2015 4:17 pm) • Benj (Tue Sep 01, 2015 10:34 am)
Rating: 23.53%
 
Ill just keep the good work up!

User avatar
Benj
Matrix Staff
Posts: 13980
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4244 times
Been thanked: 4006 times
Contact:

Re: Signed USB Drivers

Postby Benj » Mon Sep 21, 2015 10:14 am

Hello,

We posted some help here for the AVRISP driver. http://www.matrixtsl.com/faq/index.php? ... artlang=en

As it's not our product I'm not sure if we can simply generate a driver for this.

Let me know how you get on though, maybe there is something we can do to help or simplify the process.

EtsDriver
Valued Contributor
Valued Contributor
Posts: 405
Joined: Tue Apr 15, 2014 4:19 pm
Location: Kajaani, Finland
Has thanked: 327 times
Been thanked: 210 times
Contact:

Re: Signed USB Drivers

Postby EtsDriver » Thu Oct 06, 2016 4:09 pm

Hi!

Why these driver files are not included in the V7 installation by default ? (or i could not get the V7 included ones to install for Flowkit, the installer told it failed...)
These users thanked the author EtsDriver for the post:
Benj (Tue Apr 25, 2017 3:57 pm)
Rating: 5.88%
 
Ill just keep the good work up!

User avatar
Benj
Matrix Staff
Posts: 13980
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4244 times
Been thanked: 4006 times
Contact:

Re: Signed USB Drivers

Postby Benj » Tue Apr 25, 2017 3:58 pm

I've been through this recently and the drivers supplied with Flowcode 7.2.1 should now be the signed version.

I've also posted my cheat sheet for creating signed drivers here should anyone need it.
viewtopic.php?f=63&t=18815#p81075
These users thanked the author Benj for the post (total 3):
EtsDriver (Tue Apr 25, 2017 4:41 pm) • Steve001 (Sat Apr 29, 2017 7:43 am) • medelec35 (Sat May 06, 2017 5:15 pm)
Rating: 17.65%