PicKit2 / PicKit3 and EB006-00-6
Posted: Tue Oct 27, 2015 9:51 pm
Just spent an interesting the morning at Microchips Winnersh HQ learning about MPLAB-X
Was wondering if I could give things a try with my oldie E-Blocks. My EB006 is quite old - version EB006-00-6. The data sheet mentions ICD2 connector.
Would this be enough to allow it to work with a PicKit2 or PicKit3 programmer. I have the adapter that that came with the PicKit2 that goes from the ICD2 connector to the six pins that I assume I plug the PicKit into.i.e. Not use Matrix software / hardware to program the PIC's but the PicKits via MPLAB instead. Would this arrangement also work with PicKit3?
Was wondering if I could give things a try with my oldie E-Blocks. My EB006 is quite old - version EB006-00-6. The data sheet mentions ICD2 connector.
Would this be enough to allow it to work with a PicKit2 or PicKit3 programmer. I have the adapter that that came with the PicKit2 that goes from the ICD2 connector to the six pins that I assume I plug the PicKit into.i.e. Not use Matrix software / hardware to program the PIC's but the PicKits via MPLAB instead. Would this arrangement also work with PicKit3?