Hello,
A question about the E-block EB063; if we work with a 3.3V in the PIC (16F887), we can avoid using the MAX3002 ?
Thanks
Enrique
E-BLOCK EB063
-
- Posts: 311
- Joined: Sat Jan 12, 2008 2:08 am
- Has thanked: 104 times
- Been thanked: 47 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: E-BLOCK EB063
Hello,
Yes if your powering everything at 3V3 then the MAX chip is not necessary. The MAX chip is fixed in place on the E-block but if your making your own hardware then it is not required.
Yes if your powering everything at 3V3 then the MAX chip is not necessary. The MAX chip is fixed in place on the E-block but if your making your own hardware then it is not required.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 311
- Joined: Sat Jan 12, 2008 2:08 am
- Has thanked: 104 times
- Been thanked: 47 times
- Contact: