HP512-03 Protostation

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
wdiedrich
Posts: 1
Joined: Sun Mar 06, 2016 9:47 am
Contact:

HP512-03 Protostation

Post by wdiedrich »

I have the HP512-03 Protostation and need a newer schematic diagram of the function generator or at least a correct guide for using the Sine output signal as this is quite different than the document HP512-01 shows. The symbols on the board indicate that a connection to +V is required but the XR2206 doesn't support this. Can someone explain the correct usage.
Thanks

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: HP512-03 Protostation

Post by Benj »

Hello,

Sounds like this is what you need. You should be able to take the output from the signal generator output junctions as is and run it through a load to ground.
SigGen.jpg
(582.94 KiB) Downloaded 2184 times

Post Reply