EB090 Help

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Blinky
Posts: 8
Joined: Mon Sep 03, 2018 12:23 am
Has thanked: 9 times
Contact:

EB090 Help

Postby Blinky » Mon Sep 03, 2018 12:29 am

Hi all.

I’m using the Arduino E-blocks shield and development board with the E-blocks Sensors Bundle. Am I right in assuming the EB090 sensor motherboard requires power (5V || 3.3V) in order to work and work with any of the sensors such as the digital temperature sensor board, for example?

Many thanks.

User avatar
LeighM
Matrix Staff
Posts: 1768
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 417 times
Been thanked: 582 times
Contact:

Re: EB090 Help

Postby LeighM » Mon Sep 03, 2018 10:01 am

Hi,
Yes, it needs processor voltage (3v3 or 5v) connected to V+
Also for some sensors, such as Colour sensor and Ultrasonic sensor, it also needs (9v) to Vpwr
Leigh

ps. Datasheet can be found here ...
https://www.matrixtsl.com/resources/fil ... asheet.pdf
These users thanked the author LeighM for the post:
Blinky (Thu Nov 22, 2018 5:11 pm)
Rating: 5.88%
 

Blinky
Posts: 8
Joined: Mon Sep 03, 2018 12:23 am
Has thanked: 9 times
Contact:

Re: EB090 Help

Postby Blinky » Mon Sep 24, 2018 8:58 pm

Thank you. That's helpful!