E-blocks 2 BL0011

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

VladimirRepin
Posts: 26
Joined: Tue Sep 18, 2018 5:22 pm
Has thanked: 1 time
Been thanked: 3 times
Contact:

E-blocks 2 BL0011

Postby VladimirRepin » Thu Jun 06, 2019 12:02 pm

Hello

There is a problem with BL0011.

After connecting via USB, Windows sees it, but mLoader (v4) does not see, and when the program is recorded on the chip, a notification appears that the device is not connected.

This result is in Flowcode 8.0 and 8.2.
With BL0080 and PIC16F18877 there is no such problem.

Any idea what the problem might be?
Attachments
photo_2019-06-06_13-58-10.jpg
photo_2019-06-06_13-58-10.jpg (102.91 KiB) Viewed 448 times

VladimirRepin
Posts: 26
Joined: Tue Sep 18, 2018 5:22 pm
Has thanked: 1 time
Been thanked: 3 times
Contact:

Re: E-blocks 2 BL0011

Postby VladimirRepin » Fri Jun 07, 2019 6:12 pm

Okay, I solved this problem.

You need to install the necessary drivers for the board.
When you updating drivers, you must manually select them in the Flowcode v8 / Drivers folder.
This solved the problem.

P.S. Do not forget to update Flowcode to the latest version.
These users thanked the author VladimirRepin for the post (total 2):
medelec35 (Fri Jun 07, 2019 7:53 pm) • Benj (Mon Jun 10, 2019 1:18 pm)
Rating: 10.53%