I was unable to install my new multiprogramming board. The computer follows the "new hardware found installation" when connecting to the USB port. However, the hardware was not installed because the driver was not found. Did anyone have the problem of not findind the driver in the matirx multimedia cd?
thanks
rarias
Driver for new EB006
-
- Posts: 110
- Joined: Thu Sep 29, 2005 10:53 am
- Location: Matrix Multimedia
- Been thanked: 1 time
- Contact:
Did you read the USB Driver install information both on the ELSAM Mini CD, and installed as part of PPP?
There should also have been an information sheet with the EB006 explaining about the drivers, and where to look for the information.
Please install PPP (there is a new version on the web site if you wish to download the latest) and read the install instructions - there should be a shortcut in the Matriz Multimedia\PPP section of the start menu.
You will need to read the uninstall/remove driver section to clear out any incorrectly installed drivers.
And then read the install instructions appropriate for your operating system.
If you are still having problems contact us at support@matrixmultimedia.co.uk
There should also have been an information sheet with the EB006 explaining about the drivers, and where to look for the information.
Please install PPP (there is a new version on the web site if you wish to download the latest) and read the install instructions - there should be a shortcut in the Matriz Multimedia\PPP section of the start menu.
You will need to read the uninstall/remove driver section to clear out any incorrectly installed drivers.
And then read the install instructions appropriate for your operating system.
If you are still having problems contact us at support@matrixmultimedia.co.uk