Hi
When i send a CR (13) I only see an asterisk on the RS232 component. If i send text such as Hello I see that OK.
I know CR is not a printable character so I'd suspect the asterisk might be flowcodes interpretation of the sent CR.
Would this be correct?
Cheers
Ian B
What should i see on RS232 for CR
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: What should i see on RS232 for CR
Hi Ian
Thats right, for all unprintable ASCII characters we have simply used the asterisk to flag the fact that a data byte has been sent or recieved.
Thats right, for all unprintable ASCII characters we have simply used the asterisk to flag the fact that a data byte has been sent or recieved.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel