Triggering an event with specific sting received via RS232
Posted: Wed Nov 18, 2009 3:06 am
Hi Benj
In Flowcode V4 section there is a thread with the same Subject, because i use Flowcode3, i post my quention here.
I try to convert the attachment "StringComp.fcf" to Flowcode3 but can not compile with below error, also attached with flowcode3 program.
please help: -
File name: D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c
Generated by: Flowcode v3.6.11.53
Date: Wednesday, November 18, 2009 11:34:18
Licence: Professional
Registered to: Tan Incoils
http://www.matrixmultimedia.com
Launching the compiler...
C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\boostc.pic16.flowcode.exe -v -t PIC16F887 "StringComp (Flowcode3).c"
BoostC Optimizing C Compiler Version 6.70 (for PIC16 architecture)
http://www.sourceboost.com
Copyright(C) 2004-2007 Pavel Baranov
Copyright(C) 2004-2007 David Hobday
Licensed to FlowCode User under Single user Pro License for 1 node(s)
Limitations: PIC12,PIC16 max code size:Unlimited, max RAM banks:Unlimited
StringComp (Flowcode3).c
Starting preprocessor: "C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\pp.exe" "D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c" -i "C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\include" -d _PIC16F887 -la -c2 -o "StringComp (Flowcode3).pp" -v -d _BOOSTC -d _PIC16
.
D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c(684): error: missing right paren
D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c(628): error: failure
failure
..............
Return code = 1
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED
In Flowcode V4 section there is a thread with the same Subject, because i use Flowcode3, i post my quention here.
I try to convert the attachment "StringComp.fcf" to Flowcode3 but can not compile with below error, also attached with flowcode3 program.
please help: -
File name: D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c
Generated by: Flowcode v3.6.11.53
Date: Wednesday, November 18, 2009 11:34:18
Licence: Professional
Registered to: Tan Incoils
http://www.matrixmultimedia.com
Launching the compiler...
C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\boostc.pic16.flowcode.exe -v -t PIC16F887 "StringComp (Flowcode3).c"
BoostC Optimizing C Compiler Version 6.70 (for PIC16 architecture)
http://www.sourceboost.com
Copyright(C) 2004-2007 Pavel Baranov
Copyright(C) 2004-2007 David Hobday
Licensed to FlowCode User under Single user Pro License for 1 node(s)
Limitations: PIC12,PIC16 max code size:Unlimited, max RAM banks:Unlimited
StringComp (Flowcode3).c
Starting preprocessor: "C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\pp.exe" "D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c" -i "C:\Program Files\Matrix Multimedia\Flowcode V3\BoostC\include" -d _PIC16F887 -la -c2 -o "StringComp (Flowcode3).pp" -v -d _BOOSTC -d _PIC16
.
D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c(684): error: missing right paren
D:\TANLS\FlowCode V3\FlowCode Program\RS232\Communication with PC\StringComp (Flowcode3).c(628): error: failure
failure
..............
Return code = 1
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED