Hello all,
I'm looking to get some help for a little problem I’m having with a compile to Hex operation. I have narrowed it down to two component macros, the program simulates perfectly and I have built the board to mount the 18F1230 along with other programmed chips I’m using for a project but when I try to compile the 1230 I ran into a problem and I’m hoping there is a fix so I don’t have to rework my controller board for a different chip.
Here’s what I know, when I try to compile I get and error telling me I have a missing semicolon. The problem seems to be with the 2nd and 3rd Macros which I have labeled β€problem Macro 1 and 2β€, if I delete both the program will compile with no errors. If I delete just one or the other the error shows up, I have to delete both for it to compile properly. I’m hoping someone can shed a little light on this problem and it can be solved without having to change to a different chip. I have attached the FCD file for consideration. Any help would be greatly appreciated. Thank you
Cris
Help with 18F1230 Compile failure
Help with 18F1230 Compile failure
- Attachments
-
- Alert SERVO Slave F1230.fcf
- (12 KiB) Downloaded 390 times
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Help with 18F1230 Compile failure
There's a small bug in the FCD file for this chip (and the 18F1330 too). Attached are some replacements - please put these into the "FCD" folder of Flowcode.
- Attachments
-
- 18F1330.fcd
- (5.91 KiB) Downloaded 370 times
-
- 18F1230.fcd
- (5.91 KiB) Downloaded 384 times
Re: Help with 18F1230 Compile failure
Excellent that cured my problem, it compiles fine now.
Thank you very much Steve for the updated files
Cris
Thank you very much Steve for the updated files
Cris