Tutorail 34 bugs ?

Forum for problems or queries regarding the Flowcode application and compiler usage.

Moderators: Benj, Mods

canielsen
Posts: 6
Joined: Sat Oct 17, 2009 10:35 pm
Contact:

Tutorail 34 bugs ?

Postby canielsen » Thu Oct 22, 2009 11:36 pm

Hi.

IΒ΄m newbie and trying to learn to use flowcode. (Version 3 pro purchased from ELEKTOR).
IΒ΄m a littel bit confused, by some of the tutorials, cause the simulation does not work as expected.
Example: When iΒ΄m trying to run tutorial 34 (TUT_34), the display show 37+21 = 0 and 37 - 21 = 0 - when i run the simulation.

If i make the circuit with e-bloks, and program the microcontroller, the programs works ok and the display shows the right information.

Why does some of the tutorials not works properly when the programs are simulated ?. Am i doing somethinh wrong ?.

User avatar
Benj
Matrix Staff
Posts: 14130
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4325 times
Been thanked: 4070 times
Contact:

Re: Tutorail 34 bugs ?

Postby Benj » Fri Oct 23, 2009 8:01 am

Hello

Tutorial 34 is a C code demo to demostrate how to use C code in your programs.

The simulation does not work because Flowcode cannot simulate raw C code.

canielsen
Posts: 6
Joined: Sat Oct 17, 2009 10:35 pm
Contact:

Re: Tutorail 34 bugs ?

Postby canielsen » Fri Oct 23, 2009 10:09 am

Thank you very much.