A bootloader Please

Forum for suggestions regarding the next update / release of Flowcode

Moderators: Benj, Mods

Post Reply
hlom
Posts: 4
Joined: Mon Jul 07, 2008 2:19 pm
Contact:

A bootloader Please

Post by hlom »

A compatible bootloader formula or ECIO, everyone in dream.
Thank you

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: A bootloader Please

Post by Benj »

Hello

You can create a Bootloader to program your hardware via the serial UART using the PIC TINY bootloader.

Please refer to this topic for help setting this up.

http://www.matrixmultimedia.com/mmforum ... ader#p8626

Programming via USB then you can always use the Microchip USB bootloader and then load on your Flowcode programs via the pdfsusb software.

USB functionality in Flowcode is on its way so a usable USB Bootloader maybe included with this.

Post Reply