Nokia5110!

Tips, Tricks and methods for programming, learn ways of making your programming life easier, and share your knowledge with others.

Moderators: Benj, Mods

Post Reply
jgu1
Posts: 1333
Joined: Tue Oct 06, 2009 9:39 am
Has thanked: 1135 times
Been thanked: 299 times
Contact:

Nokia5110!

Post by jgu1 »

Hi!

Ben has been kind to make a Nokia 5110 component for me / us. In this regard, I have made a small program you can use for test. And I like to share.

Get the Nokia 5110 component for FC7 here: viewtopic.php?f=63&t=18985

These display are very cheap, few dollar each, and they seem to work very well. (Ok, mono color, but still fancy).

The program is made with a DHT22 sensor which measure temp and humidity. So also the DHT22 component in FC7 work perfect.
I used an Arduino Mega2560 ( not tested on other component yet.) The display switch between 3 picture as shown in att. picture. (Not allowed to upload all 3 picture).
Use it as an example and maybe get some ideas, and see how I have done. always easyer to get some examble. :lol:
The screen is much nicer and sharper contrast in real world , compared to the picture.

Br Jorgen.
Attachments
Udklip3.PNG
(188.37 KiB) Downloaded 3335 times
Udklip1.PNG
(203.24 KiB) Downloaded 3335 times
DHT22_NokiaMegaWorking.fcfx
(19.76 KiB) Downloaded 399 times

Post Reply