I found one of these Bourns encoder: https://www.mouser.dk/ProductDetail/Bou ... 5AqDqgrA==
I made a test in FC8 with a couble of exable from Wiki/helpmenu and will share my test with you.
The midle pin on the Encoder, I connect to 5V, the two other I added 2 pc. 1K resistor and to ground. From both output on the outer pin I connect them to the input on the Arduino.
I have change the display and I use an Anduino istead of a Pic.
Amazing, the Quad component work so perfect, so nice.
Tips, Tricks and methods for programming, learn ways of making your programming life easier, and share your knowledge with others.
1 post • Page 1 of 1
- Posts: 1045
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 950 times
- Been thanked: 242 times
- (12.46 KiB) Downloaded 16 times
- (10.54 KiB) Downloaded 14 times
- Rating: 16.67%