Hi all!
I found one of these Bourns encoder: https://www.mouser.dk/ProductDetail/Bou ... 5AqDqgrA==
I made a test in FC8 with a couble of exable from Wiki/helpmenu and will share my test with you.
The midle pin on the Encoder, I connect to 5V, the two other I added 2 pc. 1K resistor and to ground. From both output on the outer pin I connect them to the input on the Arduino.
I have change the display and I use an Anduino istead of a Pic.
Amazing, the Quad component work so perfect, so nice.
Br Jorgen.
Quad-Encoder!
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Quad-Encoder!
- Attachments
-
- Quad_Encoder_IOCMega.fcfx
- (12.46 KiB) Downloaded 302 times
-
- Quad_Encoder_Mega.fcfx
- (10.54 KiB) Downloaded 293 times