Upload codes from FlowCode V7 to MIAC

For MIAC users to discuss projects, applications, and any other issues related to the MIAC unit.

Moderators: Benj, Mods

Post Reply
Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Upload codes from FlowCode V7 to MIAC

Post by Monie Jacobsen »

Hello everyone
For MIAC type MI5466 ATmega.
Just bought 1 pc. Arduino compatible for MIAC

Can not upload codes from FlowCode V7 to MIAC!

How can I upload codes from FlowCode V7 to MIAC? Like to refer to a Web link.
Where can I download driver for MI5466 ATmega?
Have tried but get the following message: Device Driver Prog Breastfed was not installed?


User:
Flowcode V7
Windows 7 64 Bit
Best Regard
Monie

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: Upload codes from FlowCode V7 to MIAC

Post by LeighM »

Hi Monie,

Does your windows PC detect the MIAC USB when it is plugged in?
Windows should install the required drivers.
If it does not, please download and install the FT230X VCP drivers from http://www.ftdichip.com
http://www.ftdichip.com/Drivers/VCP.htm

I have attached our draft help guide.

Let me know how you get on,
Regards
Leigh
Attachments
HP0819 MIAC Flowcode Getting Started Guide.pdf
(1.77 MiB) Downloaded 412 times

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Upload codes from FlowCode V7 to MIAC

Post by Monie Jacobsen »

Hello LeighM
Many, many thanks for your help.
It worked fine with your referred driver.

GO'Weekend
Best Regard
Monie

Post Reply