Zigbee and usbhid

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

Post Reply
User avatar
misoct
Posts: 64
Joined: Sat Sep 04, 2010 11:03 pm
Location: Egypt
Has thanked: 8 times
Been thanked: 17 times
Contact:
Contact misoct

Zigbee and usbhid

Post by misoct »

Dear all I have a problem with my project that I need to interface Zigbee coordinator and in the same time using usbhid protocol using ECIO40
my question It is right to use Zigbee and usbhid on the same port C of ECIO
thanks
Top
kersing
Valued Contributor
Valued Contributor
Posts: 2045
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 553 times
Been thanked: 1081 times
Contact:
Contact kersing

Re: Zigbee and usbhid

Post by kersing »

USB uses pins RC3, RC4 and RC5, these pins are not available for other purposes on the ECIO40. If you configure the Zigbee component to use other pins you should be able to use both.
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis
Top
Post Reply

Return to “Flowcode V4”