Good day all.
When sending AT command to the XBee module do you have to send a Carriage return after each command?
Ondra
Zigbee sending <CR> after AT command
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee sending <CR> after AT command
Hello Ondra,
Yes I believe so, the carriage return is often used as the signal for the module to attempt to process the command string it has just received.
Yes I believe so, the carriage return is often used as the signal for the module to attempt to process the command string it has just received.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel