Why not:Flowcode USB serial
Moderator: Benj
-
- Posts: 107
- Joined: Tue Oct 04, 2011 8:55 am
- Has thanked: 3 times
- Been thanked: 6 times
- Contact:
Why not:Flowcode USB serial
I want to make a single chip microcomputer and computer communication experiment USB, but USB serial driver installation is always a mistake. As shown in figure. Please help me. Thank you!
- Attachments
-
- Flowcode USB serial.JPG (7.93 KiB) Viewed 3708 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Why not:Flowcode USB serial
Hello,
Have you generated the driver from the USB component properties and then used this driver when installing the USB serial device in device manager?
Have you generated the driver from the USB component properties and then used this driver when installing the USB serial device in device manager?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 107
- Joined: Tue Oct 04, 2011 8:55 am
- Has thanked: 3 times
- Been thanked: 6 times
- Contact:
Re: Why not:Flowcode USB serial
Yes! Generate and install! As shown in figure。But always not line! Why?
- Attachments
-
- mchpcdc.rar
- (910 Bytes) Downloaded 208 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Why not:Flowcode USB serial
Hello,
Please can you post up your Flowcode program too and I will have a look through that to see if I can spot anything.
Have you managed to get any USB comms working or are you just starting out with it from one of the example files?
Please can you post up your Flowcode program too and I will have a look through that to see if I can spot anything.
Have you managed to get any USB comms working or are you just starting out with it from one of the example files?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 107
- Joined: Tue Oct 04, 2011 8:55 am
- Has thanked: 3 times
- Been thanked: 6 times
- Contact:
Re: Why not:Flowcode USB serial
One example. The simulation is good. Download to chip can't run. And put the computer, can't find new hardware. So the driver installation not line! Thank you, help me!
- Attachments
-
- USB serial.fcf
- (7.5 KiB) Downloaded 203 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Why not:Flowcode USB serial
Hello,
I have offered a solution to the problem here.
http://www.matrixmultimedia.com/mmforum ... 29&t=10801
Let me know how you get on.
I have offered a solution to the problem here.
http://www.matrixmultimedia.com/mmforum ... 29&t=10801
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel