Flowcode program for temperature sensor and motion sensor

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

DylanBalloo
Flowcode V4 User
Posts: 73
Joined: Mon Sep 24, 2012 4:31 pm
Been thanked: 1 time
Contact:

Flowcode program for temperature sensor and motion sensor

Postby DylanBalloo » Sun Oct 07, 2012 6:31 pm

Hi there, I wanted to know if anyone one of you have a flowcode program using the temperature sensor and motion sensor. I'm completely new to flowcode I need some help.
Thank you

dazz
Posts: 1314
Joined: Sun Jan 15, 2012 3:15 pm
Has thanked: 514 times
Been thanked: 467 times
Contact:

Re: Flowcode program for temperature sensor and motion senso

Postby dazz » Sun Oct 07, 2012 8:23 pm

Hi Dylan

As enamul asked in a previous thread, what temperature and motion sensor devices will you be using, if you could tell us then aomeone will be able to point you in the right direction
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php

DylanBalloo
Flowcode V4 User
Posts: 73
Joined: Mon Sep 24, 2012 4:31 pm
Been thanked: 1 time
Contact:

Re: Flowcode program for temperature sensor and motion senso

Postby DylanBalloo » Mon Oct 08, 2012 6:54 pm

Hello Dazz,
For the motion sensor I will be using KC7783R PIR Module(http://www.rapidonline.com/Electronic-C ... dule-80434) and the temperature sensor I will use either the LM 355A IC or there's a temperature probe known as the "Wide range stainless steel temperature probe" found on matrix multimedia site(http://www.matrixmultimedia.com/product ... PHPSESSID=). Can you please advise me if the choice of sensors are good and how to proceed.
Thank you loads

dazz
Posts: 1314
Joined: Sun Jan 15, 2012 3:15 pm
Has thanked: 514 times
Been thanked: 467 times
Contact:

Re: Flowcode program for temperature sensor and motion senso

Postby dazz » Mon Oct 08, 2012 7:35 pm

Hi Dylan

i dont know those two modules , but the pir looks like a simple 0 to 5v output so should be easy to implement, the temp probe i would pm one of the matrix staff and ask for the specs etc

Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php

User avatar
JohnCrow
Valued Contributor
Valued Contributor
Posts: 1367
Joined: Wed Sep 19, 2007 1:21 pm
Location: Lincolnshire
Has thanked: 381 times
Been thanked: 716 times
Contact:

Re: Flowcode program for temperature sensor and motion senso

Postby JohnCrow » Mon Oct 08, 2012 7:58 pm

Hi Dylan

The sensors sold by Matrix have a plug similar to to UK telephones.
They are designed to fit into either the HP488 development board or the EB003 sensor e-block.
Depending if the sensor is analogue or digital the plug has a key on the left or right hand side.

Full details of the probes can be found here

http://www.vernier.com/

I built a basic PIR sensor board last year
Details can be found here along with a flowcode 4 program.

http://www.matrixmultimedia.com/mmforums/viewtopic.php?f=26&t=8178&hilit=+pir
1 in 10 people understand binary, the other one doesn't !