Zigbee router/End point E-Block

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

User avatar
misoct
Posts: 64
Joined: Sat Sep 04, 2010 11:03 pm
Location: Egypt
Has thanked: 8 times
Been thanked: 17 times
Contact:

Zigbee router/End point E-Block

Postby misoct » Wed Jun 04, 2014 11:42 am

Dear all
I have a problem with my new Zigbee router/End point E-Block where its red led does not flash but it still light and the connection failed between coordinator and router
I will be pleasure to help me
thanks

User avatar
Benj
Matrix Staff
Posts: 14151
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4330 times
Been thanked: 4080 times
Contact:

Re: Zigbee router/End point E-Block

Postby Benj » Wed Jun 04, 2014 3:30 pm

Hello,

For both programs you need to ensure that the scan channel properties are set to the same set of channels, picking a single channel for both zigbee components can sometimes give better performance as the channel scan can sometimes get it wrong or pick a noisy channel.

Also check that you are calling the ConnectTo macros after the Initialise macro, Connect to all should allow you to send data around to everything.