how to configure the processor PIC18F46K22
Posted: Fri Jul 31, 2015 4:04 pm
Hello
Can I ask for help in properly setting PIC18F46K22. In my program uses two USART ports with a maximum speed of 1200, LCD, RTC72421, a few buttons. FLOWCODE simulation program operates in accordance with my expectations. Real array or even a simulation in Proteus detached from the what shows FLOWCODE. I understand that it is not realistic simulation system, but they give a picture of the device. By reading various online forums and their experience with PIC systems I know that a large roles is as the same processor configuration, unless the PIC16 family of processors somehow give advice, that's for PIC18 lost in the maze of settings. In the Appendices is my program and a potential way to connect.
Witam
Czy mogę prosić o pomoc w prawidłowym ustawieniu PIC18F46K22. W moim programie wykorzystuje USART dwa porty o max prędkosci 1200 , LCD, RTC72421, kilka przycisków. Program w symulacji flowcode działa zgodnie z moimi oczekiwaniami. Realny układ czy też nawet symulacja w Proteus rozmija się z tym co pokazuje Flowcode. Rozumiem że symulacje to nie realny układ, ale jakiś obraz urządzenia dają. Czytając różne fora internetowe i z swoich doświadczeń z układami PIC wiem że dużą role ma znaczenie konfiguracja samego procesora, o ile z procesorami rodziny PIC16 jakoś daję rady, to już dla PIC18 zgubiłam się w gąszczu ustawień. W załacznikach jest mój program i potencjalny sposób połączeń.
Can I ask for help in properly setting PIC18F46K22. In my program uses two USART ports with a maximum speed of 1200, LCD, RTC72421, a few buttons. FLOWCODE simulation program operates in accordance with my expectations. Real array or even a simulation in Proteus detached from the what shows FLOWCODE. I understand that it is not realistic simulation system, but they give a picture of the device. By reading various online forums and their experience with PIC systems I know that a large roles is as the same processor configuration, unless the PIC16 family of processors somehow give advice, that's for PIC18 lost in the maze of settings. In the Appendices is my program and a potential way to connect.
Witam
Czy mogę prosić o pomoc w prawidłowym ustawieniu PIC18F46K22. W moim programie wykorzystuje USART dwa porty o max prędkosci 1200 , LCD, RTC72421, kilka przycisków. Program w symulacji flowcode działa zgodnie z moimi oczekiwaniami. Realny układ czy też nawet symulacja w Proteus rozmija się z tym co pokazuje Flowcode. Rozumiem że symulacje to nie realny układ, ale jakiś obraz urządzenia dają. Czytając różne fora internetowe i z swoich doświadczeń z układami PIC wiem że dużą role ma znaczenie konfiguracja samego procesora, o ile z procesorami rodziny PIC16 jakoś daję rady, to już dla PIC18 zgubiłam się w gąszczu ustawień. W załacznikach jest mój program i potencjalny sposób połączeń.