Problem RS232 comunication channels 5 and 6

Foro para hablantes de español que deseen escribir en su lengua materna.

Moderator: Benj

MOCUELSL
Posts: 51
Joined: Fri Jun 01, 2018 12:52 pm
Has thanked: 8 times
Been thanked: 5 times
Contact:

Problem RS232 comunication channels 5 and 6

Postby MOCUELSL » Tue Jun 05, 2018 7:18 am

Good morning Benj, in my project I am using the RS232 communication of the 24FJ1024GB610 microcontroller, my problem is that I do not get channel 5 and 6 defined by the chip as RS232 communicate. I enclose the file so you can see what the problem may be. Thank you very much for your attention.
regards.
Attachments
PANTALLA TFT ILI9341 - RS232.fcfx
(12.9 KiB) Downloaded 31 times

User avatar
Benj
Matrix Staff
Posts: 14130
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4325 times
Been thanked: 4070 times
Contact:

Re: Problem RS232 comunication channels 5 and 6

Postby Benj » Tue Jun 05, 2018 10:02 am

Hello,

What version of Flowcode are you using?

Do channels 5 and 6 appear in the Channel list?

Are you getting compilation errors? If so what are they?

Could you maybe explain the problem in a bit more detail as this will help me to pinpoint what I'm looking for.

MOCUELSL
Posts: 51
Joined: Fri Jun 01, 2018 12:52 pm
Has thanked: 8 times
Been thanked: 5 times
Contact:

Re: Problem RS232 comunication channels 5 and 6

Postby MOCUELSL » Tue Jun 05, 2018 11:17 am

Hi,
The version I use is the last V8, the problem is not that it does not compile, the problem is that when I compile and program the microcontroller I can not send or receive data through channels 5 and 6 of the micro. These are the ones defined for the RS232 communication of the PIC24FJ1024GB610 microcontroller. Thanks in advance.
Regards,
These users thanked the author MOCUELSL for the post:
Benj (Tue Jun 05, 2018 11:34 am)
Rating: 5.56%
 

User avatar
Benj
Matrix Staff
Posts: 14130
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4325 times
Been thanked: 4070 times
Contact:

Re: Problem RS232 comunication channels 5 and 6

Postby Benj » Tue Jun 05, 2018 1:30 pm

Many thanks, I have found the cause of the problem and pushed the fix to the updates system.

Simply run Help -> Check for updates and the updated CAL file should solve the issue for you.

MOCUELSL
Posts: 51
Joined: Fri Jun 01, 2018 12:52 pm
Has thanked: 8 times
Been thanked: 5 times
Contact:

Re: Problem RS232 comunication channels 5 and 6

Postby MOCUELSL » Wed Jun 06, 2018 7:42 am

buenos días Benj , lo he actualizado y el envió de datos es correcto pero la recepción no se lleva acabo.

Gracias por adelantado.

MOCUELSL
Posts: 51
Joined: Fri Jun 01, 2018 12:52 pm
Has thanked: 8 times
Been thanked: 5 times
Contact:

Re: Problem RS232 comunication channels 5 and 6

Postby MOCUELSL » Thu Jun 07, 2018 5:58 pm

hola benj,

TX: funciona bien.
RX: no funciona.

saludos