Hi Guys
I want to configure a PIC16C770 but when I go to the chip configuration I get a message (from the Matrix pic micro programmer) unrecognized chip on command line <PIC16C770> I have tried with other PIC16C and 12C but the problem is the same, how can I solve this issue?
Best regards
Xavier
unrecognized chip
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: unrecognized chip
Hi Xavier,
Im afraid the EB006 does not appear to be compatble with 12C or 16C devices.
From the EB006 V9 datasheet: The way around it would be to use another programmer that does support 12C and 16C devices in ICSP mode and connect it to EB006 ICSP connections.
Martin
Im afraid the EB006 does not appear to be compatble with 12C or 16C devices.
From the EB006 V9 datasheet: The way around it would be to use another programmer that does support 12C and 16C devices in ICSP mode and connect it to EB006 ICSP connections.
Martin
Martin