Hi,
I have loaded the latest version of Flowcode 5.5.2.1 and have been trying to use the EB037.
After trying the example programs (although not with the ECIO) as such and then trying
with one of John Crow's dual temp logger (again using a PIC18F4455) and lastly trying a
PIC 18F2610 with its simpler clock setting and starting from scratch. In every instance
I can get the chip working but whenever the FAT component is added I get:
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external symbol, function:FC_CAL_SPI_Set_Prescaler_1
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external symbol, function:FC_CAL_SPI_Set_Prescaler_1
Error: Unresolved external function:'FC_CAL_SPI_Set_Prescaler_1(unsigned char)'
Error: Unresolved external symbol, function:FC_CAL_SPI_Set_Prescaler_1
failure
Return code = -2
Flowcode was unable to assemble the ASM file due to the following errors:
I have tried fiddling around with the component connections.
Any suggestions where things have gone wrong?
The skeleton that works without the FAT macro and with the FAT macro fault is:
The full errors are:
Thanks in advance,
Mark
EB037 error when using FAT Component
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB037 error when using FAT Component
Hi Mark,
I've just tried it here and it's compiling ok for me. Here are the files I'm using.
This file goes into the components directory. And this file goes into the CAL/PIC directory.
I've just tried it here and it's compiling ok for me. Here are the files I'm using.
This file goes into the components directory. And this file goes into the CAL/PIC directory.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 209
- Joined: Thu Oct 19, 2006 11:46 am
- Location: Bakewell, UK
- Has thanked: 20 times
- Been thanked: 16 times
- Contact:
Re: EB037 error when using FAT Component
Ben,
Thanks, the error mesage has gone.
Mark
Thanks, the error mesage has gone.
Mark
Go with the Flow.