frequency counter & generator
Moderator: Benj
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
frequency counter & generator
i have a TMR2 to count frequency...TMR2 becouse i use TMR1...
more than 41Hz to change a variable(and disable one function), and below 41Hz to change same variable who changed more than 41Hz and enable a function...
i tryed to modify an example » 5. Digital frequency counter.fcf, and i failed...
thanks!
more than 41Hz to change a variable(and disable one function), and below 41Hz to change same variable who changed more than 41Hz and enable a function...
i tryed to modify an example » 5. Digital frequency counter.fcf, and i failed...
thanks!
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: frequency counter & generator
Hi ardiles,
Are you're using V5 professional version of flowcode?
If so can you please sign up to be a V5 registered user by following this link
Once registered, we should be able to assist you further.
Martin
Are you're using V5 professional version of flowcode?
If so can you please sign up to be a V5 registered user by following this link
Once registered, we should be able to assist you further.
Martin
Martin
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
Re: frequency counter & generator
Hi Martin! i not use "Flowcode V5 professional", i am using "Flowcode V5 for PIC free version".
i am not professional programmer, i am amateur!
i must make a pin of microcontroler like this:
0-41Hz - turning on a LED,
more than 41Hz - turning off a led...
!! frequency range is variable and total range is: (10 - 290)Hz -
is signal of speed vehicle:
Semnalul este dreptunghiular. Pentru
10km/h - 13.85Hz,
20-27.75
30-41.65
40-55.55
50-69.4
60-83
70-97.2
80-111.1
90-125
100-138.85
110-152.75
120-166.65
130-180.55
140-194.4
150km/h-208.3Hz
i am not professional programmer, i am amateur!
i must make a pin of microcontroler like this:
0-41Hz - turning on a LED,
more than 41Hz - turning off a led...
!! frequency range is variable and total range is: (10 - 290)Hz -
is signal of speed vehicle:
Semnalul este dreptunghiular. Pentru
10km/h - 13.85Hz,
20-27.75
30-41.65
40-55.55
50-69.4
60-83
70-97.2
80-111.1
90-125
100-138.85
110-152.75
120-166.65
130-180.55
140-194.4
150km/h-208.3Hz
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: frequency counter & generator
Hi ardiles,
Hobbyists (including complete beginners) use professional as that enables them to use all the communications components and not be restricted to amount of memory that can be used.
What microcontroller are you using?
You don't have to be professional programmer to use professional version.ardiles wrote:i am not professional programmer, i am amateur!
Hobbyists (including complete beginners) use professional as that enables them to use all the communications components and not be restricted to amount of memory that can be used.
What microcontroller are you using?
Martin
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
Re: frequency counter & generator
Hi Medelec35,
uc is 16f88, and the electronics for me is hobby...thats the reasoon who i dont use propessional version...
i am to level: 3inputs and 4 outputs, PWM on CCP1 or 2, and another small knowledge...
but there is another discuttion!
i try to modify an example 5.frequency counter! and i succeed to make output to be on <10Hz and afther this threshold turn off the output....
BUT: the ehample have 16x2 display, and i dont use the display! when i delete the display and it connections, the example 5.frequency counter, DONT WORK
uc is 16f88, and the electronics for me is hobby...thats the reasoon who i dont use propessional version...
i am to level: 3inputs and 4 outputs, PWM on CCP1 or 2, and another small knowledge...
but there is another discuttion!
i try to modify an example 5.frequency counter! and i succeed to make output to be on <10Hz and afther this threshold turn off the output....
BUT: the ehample have 16x2 display, and i dont use the display! when i delete the display and it connections, the example 5.frequency counter, DONT WORK
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: frequency counter & generator
Hi ardiles
Martin has asked you very politely to sign up to the V5 forums (link in my sig) ,So please can you sign up as this is in the wrong forum
Regards
Dazz
Martin has asked you very politely to sign up to the V5 forums (link in my sig) ,So please can you sign up as this is in the wrong forum
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: frequency counter & generator
Hi
No worries again please sign up to the correct forums ,as the Vc's and others who help do this voluntarily and as such our time available to help others is limited, so help us to help you,It's very difficult to offer help if people wont sign up and/or post in the correct section
Kindest Regards
Dazz
No worries again please sign up to the correct forums ,as the Vc's and others who help do this voluntarily and as such our time available to help others is limited, so help us to help you,It's very difficult to offer help if people wont sign up and/or post in the correct section
Kindest Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
-
- Posts: 23
- Joined: Tue Jun 24, 2014 11:38 am
- Has thanked: 7 times
- Been thanked: 1 time
- Contact:
Re: frequency counter & generator
Hi!
i know my post is in wrong section but, this file can be usefully to users who want a fcf work like my description...
i know my post is in wrong section but, this file can be usefully to users who want a fcf work like my description...
- Attachments
-
- frecventa.fcf
- <41Hz works, >41Hz disable
- (15.06 KiB) Downloaded 531 times
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: frequency counter & generator
Since Flowcode V5 professional was used to modify posted frecventa.fcf Flowchart, I have moved topic to the correct section.
Martin
Martin
Martin