MPLAB Check Sum

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 5.
To post in this forum you must have a registered copy of Flowcode 5 or higher.

Moderator: Benj

Collimare
Posts: 19
Joined: Thu Mar 08, 2012 9:34 pm
Been thanked: 2 times
Contact:

MPLAB Check Sum

Postby Collimare » Wed Aug 21, 2019 10:25 pm

When I compile to hex where is the checksum?

When I program I still do not see the checksum?

I need to have our program preloaded into the microchip but need the checksum for the board stuffing house.

User avatar
Benj
Matrix Staff
Posts: 14223
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4363 times
Been thanked: 4096 times
Contact:

Re: MPLAB Check Sum

Postby Benj » Thu Aug 22, 2019 9:47 am

Hello,

If you download and install the latest MPLABX and include the IPE software during the installation. Then run the IPE software and load your .hex file then it will calculate the checksum for you.

IPE.jpg
IPE.jpg (126.29 KiB) Viewed 220 times

Collimare
Posts: 19
Joined: Thu Mar 08, 2012 9:34 pm
Been thanked: 2 times
Contact:

Re: MPLAB Check Sum

Postby Collimare » Fri Aug 23, 2019 12:56 am

Hi Benj, Thank you very much for the information. It worked perfectly.

Have a good one. Howard
These users thanked the author Collimare for the post:
Benj (Tue Aug 27, 2019 3:16 pm)
Rating: 5.26%